Do i killed my brand mew mobo?

[Marcqc]

Hello im building an intel pc and i figured out that my old cpu arent compatible with this mobo but i damaged some pin here a screen http://imgur.com/DlPlXCi so i would like to know of this mobo will work with a new cpu or i killed it thanks

 

[farmerking]

https://linustechtips.com/main/topic/204966-lga-2011-motherboard-pin-repair-vlog/

 

[Rogue Leader]

That picture is very low quality but it looks like you bent about 6 pins on that socket, maybe more. You can try what farmerking posted, but TBH I would be worried to use a new CPU on that if you break one or don't get it perfect you can damage the new CPU. I would buy a new board.

 

[jimmysmitty]

Pin repair is very hard. I have done quite a few LGA boards, from just a single pin slightly off to multiple pins bent badly.

As long as they are on and have not stressed to the point of breaking off then using a plastic flat tip is the way to go but it takes a lot of time and patience, you cannot rush it.

 

[Marcqc]

Thanks all for the reply but what will happen if i just put a new cpu on it is it alot of risk that the pc dont work the mobo cost me 70$ it cheap but i want to know if it can work

 

[Rogue Leader]

Thanks all for the reply but what will happen if i just put a new cpu on it is it alot of risk that the pc dont work the mobo cost me 70$ it cheap but i want to know if it can work

You could short out the new CPU and destroy it, do not do it.

 

[Marcqc]

Thank i have put it in the trash and keeep the cmos batery lol il be very careful. Next time