Does "Logitech G502 Proteus Spectrum" have the double click problem?

dor_13

Distinguished
Oct 26, 2011
202
3
18,685
I have logitech G500 with the annoying, well known, double click problem.

I'm sick of this phantom clicks and want to buy a normal, functional mouse.

Does "Logitech G502 Proteus Spectrum" have the double click problem?
Did you/someone-you-know experienced the double click problem with G502 Proteus ?

(I don't care of the RGB but that is the only available mouse for me..)

Edit:

Same question about "Logitech G402 Hyperion Fury"
 
Solution
Hello... I go to youtube and watch a video of how to dismantle the Mouse... you will see the black rectangle plunger switches, and there will be clear numbers and names on it to read... typically cherry/Omron are the brands used... search mouser or EBAY for those numbers and brand... there are only three solder joints.

15-30 watt soldering iron is needed... lead-tin solder... and some solder wick or some fine copper wire to suckup and remove the old solder from the circuit board, for easy component removal.

https://www.radioshack.com/products/5-piece-basic-soldering-set?variant=20331813573...
Hello... it is typical for the Micro switches to go bad in a mouse... I just open it up, get the part number, order a switch and solder a new one in. I had a Razer mouse go bad after one month... new switch installed and not a problem for over a year with it. EBAY and mouser have parts available for purchase.
 
@Ironsounds:
Could you please supply me with a link to the specific part..?
It would help me a lot. Thank you!

(I suppose I should buy a soldering iron and tin? Any suggestion about a specific model/company/head-type?)
 
Hello... I go to youtube and watch a video of how to dismantle the Mouse... you will see the black rectangle plunger switches, and there will be clear numbers and names on it to read... typically cherry/Omron are the brands used... search mouser or EBAY for those numbers and brand... there are only three solder joints.

15-30 watt soldering iron is needed... lead-tin solder... and some solder wick or some fine copper wire to suckup and remove the old solder from the circuit board, for easy component removal.

https://www.radioshack.com/products/5-piece-basic-soldering-set?variant=20331813573
https://www.walmart.com/ip/30-Watt-Soldering-Iron/16539504?wmlspartner=wlpa&selectedSellerId=0&wl13=3823&adid=22222222237260395004&wl0=&wl1=g&wl2=c&wl3=108838445190&wl4=pla-138225241952&wl5=9024749&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=16539504&wl13=3823&veh=sem
http://www.homedepot.com/p/Weller-25-Watt-Short-Barrel-Hobby-Iron-Kit-8-Piece-WSB25HK/203332751
 
Solution
microswitches vary by mouse type. they are labeled on the side of the switch in case you need to ever replace them. just look it up if you ever get a failure and replace. they are literally a few dollars for several of them.

all mice can get double click problems. its failing microswitches.