Question "DPC Watchdog Violation" BSOD, and no dump files are created ?

Page 2 - Seeking answers? Join the Tom's Hardware community: where nearly two million members share solutions and discuss the latest tech.
Apr 9, 2024
28
2
35
As per usual, nothing ever comes my way easily.

- Ran driver verifier with the same settings and selections as before.
- BSOD right as I got to the windows login screen
- BSOD's continued until I used a restore point to break free.

- 0xC4: DRIVER_VERIFIER_DETECTED_VIOLATION
- Counter stayed at 0% for all BSOD's and would not write dump

-------------

- Ran driver verifier again with same settings and attempted to boot into safe mode
- Safe mode boot worked
- Reboot resulted in the same BSOD as mentioned in above section
 
Last edited:

ubuysa

Distinguished
The problem there is a bad driver that's loaded at boot. That it's fine in Safe Mode indicates that the bad driver is a third-party driver (which are not loaded in Safe Mode). Now you have to locate the bad driver...

To do that boot Windows in Clean Mode. Initially disable all third-party services and auto-start items to be certain that it will boot without a BSOD. Then you need to enable selected services to determine what makes it BSOD. I would first leave all auto-start items (in Task Manager Startup) disabled and work just with services (in msconfig). You could try a binary serach technique here; so you enable half of the services and reboot, if it BSODs the problem is in the half you enabled, if it doesn't BSOD the problem is in the half you left disabled. Focus now on the half where the problem lies and enable half of those, then reboot. By halving the group where the problem lies you can quickly drill down to the bad service.

If you end up enabling all services and it won't BSOD then move to the auto-start items and use the same binary search technique there.

Let us know how you get on with that.
 
Apr 9, 2024
28
2
35
First, let me just take a moment to thank you for all your help so far. I am 100% certain I would not be digging through this mess without your help. So - THANK YOU!

Now, on to the update...
- I intentionally took a left turn before booting into clean mode and I deleted a bunch of stuff that was in that startup in the hopes that I might stumble upon the issue ahead of time, or at the least save myself some time by eliminating the options. This didn't fix anything, but while doing it I found that my logitech software for my mouse was.. umm.. QUITE out of date. So, that got fixed.
- next up was the clean boot. disabled everything the guide told me to and... I was still getting a BSOD as I arrived at the windows login screen. For some odd reason the AMD Adrenaline software was still showing up in the tray, even though it was disabled in the startup.

- I was getting a little pissed at this point so I took a little trek into DDU and yoinked out the display drivers. Still BSODing. I then went back into DDU and used the WIP Realtek driver removal section to get rid of anything realtek and... VOILA! Able to get into normal windows without any BSOD's.

- With verifier still running I re-installed my display drivers and reboot tested. Still good.

- I then went in and for $hits and giggles I restored everything I had disabled for the clean boot and tested again. Still no problems. Reinstalled the sound drivers and tested again - still working fine.

- Noticed during all this that Gigabyte had released a new MB bios update, so I disable verifier and did the bios update. All remained good.

Note: None of those BSOD's resulted in a dump, and all were of the "0xC4: DRIVER_VERIFIER_DETECTED_VIOLATION" variety.


I have the next 2 days off so I plan on running driver verifier for much of that to see if there are any other surprises waiting for me.

I will let you know how that goes.
 

ubuysa

Distinguished
That sounds pretty encouraging. I don't recommend that sort of scatter-gun troubleshooting, it rarely leads to a satisfactory outcome - IE. one where we know what the cause was - but I do understand the urgency in getting to a stable system.

There is rarely much benefit in running with Driver Verifier enabled for more than 48 hours. They key thing when you have Driver Verifier enabled is to use every app, every device, every feature, that you can. Driver Verifier can only check drivers as they are loaded, so you need to ensure that every driver you have installed is loaded at some point - by using every app/device/feature.

It is concerning that the 0xC4 BSODs appear to not be writing dumps. That negates the whole purpose of Driver Verifier - because the answers are in the dumps. In order for dumps to be written all of the following must be true...
  • The page file must be on the same drive as your operating system
  • Set page file to "system managed"
  • Set system crash/recovery options to "Automatic memory dump"
  • Overwrite any existing file box must be checked
  • The dump file location must be %SystemRoot%\MEMORY.DMP
  • Windows Error Reporting (WER) system service should be set to MANUAL
  • User account control must be running
In addition, the following can also prevent you seeing dumps...
  • SSD drives with older firmware do not create dumps (update the drive firmware)
  • Cleaner applications like Ccleaner delete dump files, so don't run them until you are fixed
  • Bad RAM may prevent the data from being saved and written to a file on reboot, so if all else fails test your RAM
 
Apr 9, 2024
28
2
35
As I have been re-installing some of the stuff that I removed I have created a new BSOD with an error code not from your list.... and it kicked out dumps :)

- Reinstalled NordVPN with default settings and rebooted the machine
- Nord is the last thing to load up and about 5 seconds after I see the icon in the tray I get this BSOD
- IRQL NOT LESS OR EQUAL
- After reboot the exact same thing happens at the same time
- 3rd reboot and I waited for the icon to appear in my taskbar and immediately closed Nord when the icon showed up. This seems to have broken the loop. Allowing me time to do this post and get the dump files.

Here are the dump files from both crashes

1st crash - https://www.dropbox.com/scl/fi/jj4k...ey=t80obezshzipopaplgerwwrmc&st=kdmeq67z&dl=0

2nd crash - https://www.dropbox.com/scl/fi/vb2n...ey=5i2e14vvvzg1tsryozzvhz40f&st=0yx1b834&dl=0

I will continue to update this post as more happens.
 
May 7, 2024
203
36
120
As I have been re-installing some of the stuff that I removed I have created a new BSOD with an error code not from your list.... and it kicked out dumps :)

- Reinstalled NordVPN with default settings and rebooted the machine
- Nord is the last thing to load up and about 5 seconds after I see the icon in the tray I get this BSOD
- IRQL NOT LESS OR EQUAL
- After reboot the exact same thing happens at the same time
- 3rd reboot and I waited for the icon to appear in my taskbar and immediately closed Nord when the icon showed up. This seems to have broken the loop. Allowing me time to do this post and get the dump files.

Here are the dump files from both crashes

1st crash - https://www.dropbox.com/scl/fi/jj4k...ey=t80obezshzipopaplgerwwrmc&st=kdmeq67z&dl=0

2nd crash - https://www.dropbox.com/scl/fi/vb2n...ey=5i2e14vvvzg1tsryozzvhz40f&st=0yx1b834&dl=0

I will continue to update this post as more happens.
Both logs do indeed point to NDivert.sys, a NordVPN driver. Keep fighting the good fight soldier!
 
Apr 9, 2024
28
2
35
@ CodeConnoisseur - o7

- Rebooted to confirm that Nord fully loading would cause BSOD - it did
- Rebooted and closed the Nord icon as I did before to break the loop. Loop seemed broken.
- Ran Revo to remove nord fully; as soon as the Nord uninstaller loaded I got another new BSOD, also not from your list. Blessed with a dump this time as well.
- Rebooted again but this time I did a shift restart to get into safe mode where I Revo uninstalled Nord. This post made possible due to Nords removal.

BSOD Error this time - PAGE FAULT IN NONPAGED AREA
- and the dump file created https://www.dropbox.com/scl/fi/0p72...ey=sjsp0w9h4n0g7i1v0xfj4t00q&st=n07gdnbl&dl=0
 
Apr 9, 2024
28
2
35
- Re-installed Nord, but this time I did not use it's default settings (which included having nord auto-connect after boot)
- System stable until connection with VPN was attempted which resulted in the same BSOD as above when it was going it's inital loads.

So I know the driver in Nord that is being a dik is something that is activated only when connecting to the VPN.

----------------------------

- Installed AMD Adrenalin software and rebooted
- BSOD upon login screen - dump created
- Error type - DRIVER_VERIFIER_DETECTED_VIOLATION
- and this latest dump https://www.dropbox.com/scl/fi/j1x3...ey=wu3d2177qh5l0mgjzo00srj3m&st=u9mv158m&dl=0
 
Last edited:

ubuysa

Distinguished
The earlier two 0xA BSODs do indeed appear to be down to the NDivert.sys driver. The version you have installed is dated June 2022. However, in my copy of NordVPN the NDivert.sys driver has the same date. There does appear to be a problem with yoiur NordVPN installation however, I would fully uninstall it and reboot to confirm that all is well without it. Then you can download a new copy and do a clean install of NordVPN.

The latest dump, the 0xC4 Driver Verifier detected BSOD, is failing AMDRyzenMasterDriver.sys - a component of Adrenalin. What the driver did wrong was to neglect to free all its pool allocations prior to unloading.

I don't believe in having several different problems at the same time, there is likely to be a common connection between them. I know you've tested RAM with Memtest86 but the gold standard RAM test is to remove one stick and run with just 16GB for a week or two to confirm that the remaining stick doesn't BSOD (or that it does of course). Ensure that the remaining RAM stick is in the correct slot for just one stick. After a week or two swap the sticks over and run on just the other for another week or two.

RAM is the most likely common denominator here and it's important to be 100% confident that both sticks are good. Removing one stick is the only guaranteed way to do that.
 
  • Like
Reactions: CodeConnoisseur
Apr 9, 2024
28
2
35
Well, it took forever but running a single stick of memory at a time resulted in no difference. Still getting the same BSOD w/o dumps being written.
 

ubuysa

Distinguished
I've just been looking back at something you said earlier...
As I have been re-installing some of the stuff that I removed I have created a new BSOD with an error code not from your list.... and it kicked out dumps
Does this mean that the PC was behaving itself UNTIL you reinstalled some stuff you had removed?

If that's true (and we know there were problems with the version of NordVPN you were using) then the failure must be down to whatever you reinstalled?
 
Apr 9, 2024
28
2
35
The only thing I did was remove a stick of memory, and then after my BSOD swap the memory with the previously removed one. Making sure of course to use the correct single slot.

For the last couple months I have also been getting random system restarts (one every 2 or 3 weeks), and system freezes (every 2-5 days).

Crashes of any type still seem to be happening at random. Just as much likelihood of them happening while system is sitting idle as there is under heavy load.
 

ubuysa

Distinguished
What I really wanted to know was whether BEFORE you reinstalled some of your stuff were you having problems?

I see many users do a reinstall of Windows and then go on and reinstall all their stuff - and all they've done is reinstall the problem! The key question really is; does it behave OK with just Windows, drivers, and all Windows updates installed?
 
Apr 9, 2024
28
2
35
I never re-installed anything.

...also, my first ever BSOD on this machine was mere minutes after windows install, prior to me updating any drivers from the default windows drivers.
 

ubuysa

Distinguished
Hmm, this is looking like a hardware problem give what you mention above. Taking also into account that NordVPN seems to cause a BSOD and that earlier you were able to clean boot by removing Realtek drivers. Realtek make network adapter drivers as well as sound drivers, so I'm wondering whether the Realtek and NordVPN connection might mean that a flaky network adapter is the cause of the problems?

What network adapter do you normally use?
 
Apr 9, 2024
28
2
35
Just the default one that is on the MB. According to the MB website the networking is "Intel® GbE LAN chip (10/100/1000 Mbit)".
 

ubuysa

Distinguished
I just went to you motherboard vendor's website to look for a LAN driver update. There isn't a recent one BUT there are Jan 2024 driver updates for the chipset and APU. They should be installed if they're not already.

If those drivers are installed then disable the LAN adapter in Device Manager and connect via the on-board WiFi adapter, see whether that changes anything?
 
Apr 9, 2024
28
2
35
Chipset & APU drivers are already updated to those versions so I am good on that front.

As for your next request, connect via wifi adapter. No wifi here to connect to, so no can do.
 
Apr 9, 2024
28
2
35
No, I am one of the very few who do not own a cell phone. Cell phone rates in Canada are some of the worst in the world - not something I can afford.
 

ubuysa

Distinguished
Wow. In that case uninstall the on-board LAN adapter in Device Manager, also uninstall its driver if asked, and reboot. You will of course have no Internet access but see whether you can make the PC BSOD.
 
Apr 9, 2024
28
2
35
Don't think that is something I can do. Completely cutting myself off from the internet for what could potentially be up to a month is something that is probably not going to happen. :(
 

ubuysa

Distinguished
I honestly don't know how else to help you. Everything I'm suggesting is either impractical or impossible. You have to be able to troubleshoot to have any hope of finding out the cause and troubleshooting is often painful.
 
Apr 9, 2024
28
2
35
I assure you, I am not trying to be difficult. Your help thus far has been invaluable and beyond appreciated.

Let me pose a question to you with no strings attached; Do you think we have at least isolated it to being a motherboard issue? At this point I am strongly considering swapping out the MB for a b550 board that is on sale at my local Canada Computers.