Hello,
I've received new RAM (2x16GB) for the holidays and have been trying to install it along with my old RAM (2x8GB). The old RAM sticks have been placed in the 1 and 3 slots while the new RAM sticks were placed in the 2 and 4 slots. Once they were seated, I powered on the computer and got the DRAM light on. I have a X570-A PRO MSI motherboard. I have tried multiple things, such as new RAM sticks in 2 and 4 and 1 and 3, switched them around so the one that was previously in 2 was in 4 for example, I have tried the old RAM sticks in the same method too. I have also tried old and new RAM sticks in 3 and 4, but to no avail.
In the end, I tried no RAM sticks at all, yet the DRAM light is still on. I get no output on my monitor as it displays "No Signal". On inspection of the slots, no pins appeared to be damaged. Every other component of the computer appeared to be working fine. Any advice or help would be greatly appreciated.
I've received new RAM (2x16GB) for the holidays and have been trying to install it along with my old RAM (2x8GB). The old RAM sticks have been placed in the 1 and 3 slots while the new RAM sticks were placed in the 2 and 4 slots. Once they were seated, I powered on the computer and got the DRAM light on. I have a X570-A PRO MSI motherboard. I have tried multiple things, such as new RAM sticks in 2 and 4 and 1 and 3, switched them around so the one that was previously in 2 was in 4 for example, I have tried the old RAM sticks in the same method too. I have also tried old and new RAM sticks in 3 and 4, but to no avail.
In the end, I tried no RAM sticks at all, yet the DRAM light is still on. I get no output on my monitor as it displays "No Signal". On inspection of the slots, no pins appeared to be damaged. Every other component of the computer appeared to be working fine. Any advice or help would be greatly appreciated.