If you are still looking for a way to get Dune 2000 to run, and if you feel like doing some work to get it working, then see below.
This is how I eventually got it working, on my system.
I got it working, under a Oracle VirtualBox running Windows 95.
I suppose if you are running windows, as your main OS, you can also try the following solution, by installing Oracle VirtualBox, onto your Windows Machine, but here is how I eventually got it to run.
I Eventually got Dune 2000 to run, properly.
No bugs, not to fast, no sound or scrolling anomalies, no hanging every couple of seconds.
I Tried it under wine, but it ran too fast, the scrolling was way too fast, even if you switch the scroll speed way down and it hanged every couple of seconds.
I Also tried in an Oracle VirtualBox Running XP and Windows 98SE, with the same issues,
I Eventually Got Dune 2000 working in openSUSE 12.2 64 bit, under a Oracle VirtualBox, running Windows 95.
Here is what you'll need:
1. Windows 95 Install Disk
2. Windows 98SE Install Disk
3. SciTech Display Driver, which can be downloaded from: 4.
https://www.dropbox....ay-doctor-7.iso
5. Dune 2000 Disk
Step 1.
Setup a VirtualBox with the following settings:
Hard Drive 4GB
Memory 512MB
Enable IO APIC
1CPU
Enable PAE/NX
No CPU Throttling
Sound Set to emulate Sound Blaster 16
Do Not enable:
VT-x/AMD-V
or Nested Paging
Under the Display settings, I set it to 32MB with 3D & 2D Acceleration enabled.
Step 2.
Start the system with the Windows 98SE Disk. (The reason for this is that the 98SE Disk is bootable, but the 95 Disk isn't)
Select Boot computer with cd-rom support.
go:
D:
cd WIN98
fdisk
create 4GB Primary Partition and set it as active.
(It should automatically set it as active)
After creating the partition, the system will reboot.
Boot with the 98 Disk again & select boot system with cd-rom support.
go:
d:
cd WIN98
format c: /S
/S to copy system files
Step 3.
Insert Windows 95 Disk into CD-Rom.
c:
md WIN95
d:
cd WIN95
copy D:\WIN95\*.* C:\WIN95 /Y
c:
cd WIN95
setup
Step 4.
Install Windows 95
Install SciTech Display Driver.
(The SciTech Download is an iso, so you can mount it like you would a cd-rom drive.
Enable SciTech Display Driver, enable driver only, do not enable any extended features.
(for more info see:
https://forums.virtu...opic.php?t=9918 )
Change Resolution to 1024 x 768 16Bit
Step 5.
Install Dune2000
Step 6.
Enjoy!!!!!!