EDGE TWIN Subwoofer

Status
Not open for further replies.
Solution
You are going to need a 12 volt DC power supply. The amount of wattage it will need is impossible to say for sure from the specs on the link. Check with the maker about how much amperage it will pull. If there is a fuse for the 12v input that value would help. Multiple that by 12 and you have the required wattage for the power supply. Since the built in amp is 600w rms you may need as much as 1200-1800 watts at 12 DC to get full power out of it. Not a small or inexpensive power supply so it may cost a bit more than you expect to convert from auto to home use.
You are going to need a 12 volt DC power supply. The amount of wattage it will need is impossible to say for sure from the specs on the link. Check with the maker about how much amperage it will pull. If there is a fuse for the 12v input that value would help. Multiple that by 12 and you have the required wattage for the power supply. Since the built in amp is 600w rms you may need as much as 1200-1800 watts at 12 DC to get full power out of it. Not a small or inexpensive power supply so it may cost a bit more than you expect to convert from auto to home use.
 
Solution
Status
Not open for further replies.