Question Enabled XMP, computer doesn't post

[pekodam]

Hi, I've been running at 2133 MHz and have recently tried to enable XMP to get the advertised 3600 MHz but when I enabled it, my computer refused to post. I then cleared the CMOS then tried to just manually set the speed to 3600 MHz (I forgot the name of the exact setting) and again, computer refused to post. Any ideas?

Specs:
G.Skill Ripjaws V DDR4 3600 16 gb
Ryzen 5 3600
MSI B450 Gaming Plus Max
EVGA 650 B5 80+ Bronze
MSI GTX 1660 Super

 

[helpstar]

update your motherboard´s BIOS using M-Flash and try again

View: https://youtu.be/sKMub20CUNI


be sure the RAM is installed in the Dimm slots A2 and B2 (if you are using 2 RAMs)

 

[pekodam]

update your motherboard´s BIOS using M-Flash and try again

View: https://youtu.be/sKMub20CUNI


be sure the RAM is installed in the Dimm slots A2 and B2 (if you are using 2 RAMs)

Alright will do.

 

[pekodam]

update your motherboard´s BIOS using M-Flash and try again

View: https://youtu.be/sKMub20CUNI


be sure the RAM is installed in the Dimm slots A2 and B2 (if you are using 2 RAMs)

This worked, thank you! The first XMP Profile didn't work so I had to reset the CMOS again and tried the 2nd profile and now it's working perfectly thanks.