- Apr 18, 2016
- 4
- 0
- 1,510
Hey all! I've got a problem. Just upgraded a couple parts in my 2 year old rig. Went from an ASUS Z170-A to an ASUS PRIME X299-A & Intel i7-6700k to an Intel i7-7820x. Also bought a new watercooler. Went from the Corsair H100i to the Corsair H115i Pro RGB.
I have hooked everything up and I have no display on my monitor. Here's what I have tried:
One memory stick at a time, re-seating the CPU, clearing CMOS, having only the optical and SSD for boot plugged in.
I can't really think of any others I might have done but I'll add them in if I think of it. My motherboard also has the Q Code of A2, which I found out means IDE Detect and I can't seem to figure this out really. Im at a loss.
The rest of my rig:
Mushkin SSD Evo 2.5 240gb
WD SSD Blue 500gb
WD Blue 3tb HDD
GTX 1080ti
750w Rosewill PSU
Corsair Vengeance 16gb DDR4 2133
Any advice would be 100% appreciated.
I have hooked everything up and I have no display on my monitor. Here's what I have tried:
One memory stick at a time, re-seating the CPU, clearing CMOS, having only the optical and SSD for boot plugged in.
I can't really think of any others I might have done but I'll add them in if I think of it. My motherboard also has the Q Code of A2, which I found out means IDE Detect and I can't seem to figure this out really. Im at a loss.
The rest of my rig:
Mushkin SSD Evo 2.5 240gb
WD SSD Blue 500gb
WD Blue 3tb HDD
GTX 1080ti
750w Rosewill PSU
Corsair Vengeance 16gb DDR4 2133
Any advice would be 100% appreciated.
Facebook
Twitter
Instagram