error in overclocking prime95

[Carlo Vargas]

what does

error : illegal sumout means?
and
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.


im trying to overclock my amd fx 8350
failed at any clock. even with the asus turbo mode in the eufi bios it fails prime95

 

[Winly]

It means your overlock failed. How are you doing your oc?

 

[Carlo Vargas]

ive been trying to OC. with stock voltages but from 4.0 to 4.4 only . idk why i get those error. if i put my llc to high i get my temps up to 65C to 70C+

im using corsair h80 btw

 

[Winly]

Try to increase your voltage. Also don't make a big jump from 4 to 4.4 you need to go from 4.0 to 4.10 etc. so restore all settings to default and start again. Increase it to 4.1 and test with prime95 if it fails give it some voltage and text again. In voltage do it little by little don't increase too much from one shot, do it on increments. Hope that helps

 

[nikoli707]

if your getting prime errors then your very close to being stable, usually you will just bsod from instability. just give it a small bump up in vcore.... 0.05v or 0.10v.

 

[Winly]

if your getting prime errors then your very close to being stable, usually you will just bsod from instability. just give it a small bump up in vcore.... 0.05v or 0.10v.

correct!