Ethernet cable is connected but doesn't give me internet

[tryggvisn]

Hi
My etherbet cable has been working well since I connected it about 6 months ago but I just got fibre (gigabits network) and now the cable doesn't give me any internet when I use Wi-Fi not he same pc it works and the cable doesn't work on my pc or laptop

 

[anotherdrew]

Cables can fail. Especially if it is stepped on or pulled or twisted. Fortunately they are not expensive.

 

[scout_03]

get a new cable .

 

[tryggvisn]

Cables can fail. Especially if it is stepped on or pulled or twisted. Fortunately they are not expensive.

is it enough to change the connectors??

 

[tryggvisn]

get a new cable .

is it enough to change the connectors??

 

[scout_03]

cable could be broke inside and even if you change connector might not work test it with a ohm before putting new connector on .

 

[tryggvisn]

cable could be broke inside and even if you change connector might not work test it with a ohm before putting new connector on .

how do i test it with an ohm

 

[tryggvisn]

cable could be broke inside and even if you change connector might not work test it with a ohm before putting new connector on .

I can´t test the cable because one end is in the attic and the other one in my room

 

[scout_03]

you could use something like this https://www.amazon.ca/Stanz-Network-Cable-Tester-Phone/dp/B01K1DBKN6/ref=sr_1_4?ie=UTF8&qid=1534708648&sr=8-4&keywords=lan+cable+tester

 

[tryggvisn]

you could use something like this https://www.amazon.ca/Stanz-Network-Cable-Tester-Phone/dp/B01K1DBKN6/ref=sr_1_4?ie=UTF8&qid=1534708648&sr=8-4&keywords=lan+cable+tester

I can't get both ends in the same place because one is in the attic and the other one is in my room but i will change the connectors tonight or tomorrow

 

[anotherdrew]

For a tester, you don't need both ends in the same place. You plug one end into the remote box and then the other end into the master box. The picture does make it look like it is all one box, but it is 2.