Ethernet connected no internet

[Aron Vajda]

Hello. While I had win 7 had no problems with internet. Yesterday I installed clean windows 10 pro. Had some minor internet crashes but it got stable. As of this morning pc says ethernet is connected but theres's no internet. Searched google and tried disconecting firewall, disconnecting ipv6, ipconfig flush/renew but nothing happened. Tried different cable. The connection goes diretctly from modem to pc. Also on the login page there were artifacts few times.

 

[Aron Vajda]

I should mention devices on wifi work.

 

[Colif]

have you updated your motherboard drivers for win 10?

what are specs of machine?
is Ethernet card onboard or extra card?

 

[weberdarren97]

So you've already tried this method http://www.sysprobs.com/fixed-windows-10-limited-connectivity-not-getting-ip-from-dhcp ?

 

[weberdarren97]

Maybe try opening command prompt as admin and issue this command "netsh int ipv4 install"?

 

[Aron Vajda]

Yes, i downloaded the drivers from mobos website. Etherner is onboard. Specs are msi h61m-p20, i5 3470, saphire hd 7750, 8gb hyperx.

 

[GreyCatz]

Hello. While I had win 7 had no problems with internet. Yesterday I installed clean windows 10 pro. Had some minor internet crashes but it got stable. As of this morning pc says ethernet is connected but theres's no internet. Searched google and tried disconecting firewall, disconnecting ipv6, ipconfig flush/renew but nothing happened. Tried different cable. The connection goes diretctly from modem to pc. Also on the login page there were artifacts few times.

Greetings, Aron:

I had similar problems when upgrading from Win7 to Win10. In my case, it turned out that my Broadcom network adapter had been "knocked out" during the upgrade. I then downloaded the latest driver from Broadcom's web site and had the connection working right away.

So, find out the name of your network adapter (RealTek, Broadcom etc) by opening the Device Manager window. Go to the manufacturer's web site and see if there are any drivers available. You can use a standard USB stick and run the driver directly from the stick.

Best of luck,
GreyCatz.

 

[weberdarren97]

The artifacts happened to me too, the system just took a few reboots to stabilize and they went away. Also, if device manager identifies it as "Unknown Device" or "other" then right click it and go to properties and look it up by its hardware IDs.

 

[Aron Vajda]

So you've already tried this method http://www.sysprobs.com/fixed-windows-10-limited-connectivity-not-getting-ip-from-dhcp ?

Tried it, didn't work.

 

[Aron Vajda]

Hello. While I had win 7 had no problems with internet. Yesterday I installed clean windows 10 pro. Had some minor internet crashes but it got stable. As of this morning pc says ethernet is connected but theres's no internet. Searched google and tried disconecting firewall, disconnecting ipv6, ipconfig flush/renew but nothing happened. Tried different cable. The connection goes diretctly from modem to pc. Also on the login page there were artifacts few times.

Greetings, Aron:

I had similar problems when upgrading from Win7 to Win10. In my case, it turned out that my Broadcom network adapter had been "knocked out" during the upgrade. I then downloaded the latest driver from Broadcom's web site and had the connection working right away.

So, find out the name of your network adapter (RealTek, Broadcom etc) by opening the Device Manager window. Go to the manufacturer's web site and see if there are any drivers available. You can use a standard USB stick and run the driver directly from the stick.

Best of luck,
GreyCatz.

Tried this one too, didn't work for me. Now the ethernet keeps dc-ing, identifying and "reconectin", and still no internet.

 

[Aron Vajda]

I also uninstalled Eset cause I red that it may block it (for some reason) and that didn't seem to fix it either. Gonna check cables again. Also the artficats seem to be the cursor, that's next on fixing list.

 

[Aron Vajda]

So, I changed the speed and duplex settings, that fixed it for me. Aldo when I restart the pc it won't save my settings...