Ez debug leds behaviour(msi h110m pro vh plus)

[kabi]

Hi,I built a Pc,specs-intel i3 6100,msi h110m pro vh plus,Kingston 8gb ddr4 hyperx fury,wd 1tb hdd,Corsair vs 450 psu.
From the very first time I had booted the pc the Ez debug leds flash one by one in a cycle (first cpu led then less than a second it is turned off and then ram led then after a second it's turned off then vga led) and turned off! Finally pc boots into windows and all leds are turned off!NO PROBLEMS WHILE USING PC(when booted into windows),
build is nice,clean and perfectly done.also updated the bios with mflash,cleared cmos,changed ram slot but it's same!
Depressed!!, please guys help me figure it out!

 

[Lutfij]

So long as you're on the latest BIOS update for your motherboard, that the rams are in the right slots and you're not seeing any issues when working on OS, then you've got nothing to worry about.

 

[kabi]

So long as you're on the latest BIOS update for your motherboard, that the rams are in the right slots and you're not seeing any issues when working on OS, then you've got nothing to worry about.

Yea,think so,as it is still going on but those leds! Every time I see those I ......,! Ah! What the hell! What is it supposed to be?!

 

[Greeko85]

The Leds are there to guide you for potential issues-they are cycling through, no issues detected and they turn off. As mentioned if your system is working fine there's no reason to be worried.