Question Fans going full speed, need hub recommendation

[Chujova]

Hello everyone,

I got Gigabyte B450M-H motherboard.
Case - GEMBIRD midi-tower computer case Fornax K700 ATX black (It comes with 3 fans, each got 4 pins; and 1 fan with 3 pin ARGB).
The problem is that my motherboard is old and it doesn't have ARGB connection. Only CPU and SYS_FAN.
I have connected all my fans on SATA cable to the PSU (they work full speed, playing inside gets hot and loud).

Today I bought "Magnetic PWM & ARGB Fan Hub Controller (+5V 3Pin) 9 port SATA powered" - that was my mistake, because as I understood that this fan hub needs both connections PWM and ARGB to function.

I don't really care about RGB, I can live without it. But I would seek some recommendations what to do.
"Deepcool FH-04 fan hub" would let me connect 3 fans, but 3pin ARGB fan would work as single fan?
Or I should upgrade the motherboard to the newer one?

Hopefully someone understood me,

Thanks!

 

[Lutfij]

Welcome to the forums, newcomer!

I have connected all my fans on SATA cable to the PSU (they work full speed, playing inside gets hot and loud).
https://gembird.com.pl/item.aspx?id=11809
You might want to take off the front panel of the case and see if the temps drops. FYI, that case is a horrible choice for a build.

Looking at the manual for the case;
https://gembird.com.pl/Repository/1...al---74ab3df2-3ee1-47fe-9c7d-6373032ee619.pdf
the fans are all molex driven, you don't need a PWM hub, you're going to need PWM fans.

 

[Chujova]

Welcome to the forums, newcomer!

I have connected all my fans on SATA cable to the PSU (they work full speed, playing inside gets hot and loud).
https://gembird.com.pl/item.aspx?id=11809
You might want to take off the front panel of the case and see if the temps drops. FYI, that case is a horrible choice for a build.

Looking at the manual for the case;
https://gembird.com.pl/Repository/1...al---74ab3df2-3ee1-47fe-9c7d-6373032ee619.pdf
the fans are all molex driven, you don't need a PWM hub, you're going to need PWM fans.

Thanks for the answer. I get it now.
I need some adapters then or new fans yeah.