Question Faulty 3600X or Memory?

[RedLizard]

Hi,

due to some crashes of games and programms I tested the CPU with Prime 95 and the memory and got errors. You might be able to get some light onto those:

Prime 95:

FATAL ERROR: Rounding was 0.5 expected was less 0.4

Hardware failure detected, consult stress.txt file.

Toture Test completed 0 tests in 0 minutes - 1 error, 0 warnings.

Worker stopped.

This happened only on worker #7,#8,#11 and #12
Temps were on 71°C Peak

MemtestX86 showed this on run 2 out of 4 (the other 3 ran without errors):

2020-03-03 16:59:50 - [MEM ERROR - Data] Test: 8, CPU: 6, Address: 21CFB180, Expected: 0198BE1D, Actual: 550F4B81
2020-03-03 17:01:27 - [MEM ERROR - Data] Test: 8, CPU: 7, Address: 410ACA1C0, Expected: 7451C6C4, Actual: E5C7B9B6

I've no oc nor anything, everything is up to date.

Specs:

Ryzen 3600X on Gigabyte X570Pro (Bios F11)
2x 8 GB G.Skill Trident Z Neo @ 2133 mHz (due to testing XMP wasn't activated [3600mHz is XMP clock)

 

[NightHawkRMX]

Run memtest X86 can verify if ram is the issue:

https://www.memtest86.com/

 

[RedLizard]

Run memtest X86 can verify if ram is the issue:

There is an error shown in the post, but I have no clue to what it directs me, CPU or Memory....

 

[NightHawkRMX]

Sorry, I'm blind.

If memtest is giving you an error, I would be confident its either a ram issue or a ram compatibility issue with other hardware.

Reseat ram and make sure its in the correct spots. Completely clear CMOS then do the following:

Try to rais SOC voltage (under CPU section) to 1.1v and DRAM voltage to 1.45v while keeping speed at 2133. This may help temporarily, but may not.

 

[RedLizard]

If memtest is giving you an error, I would be confident its either a ram issue or a ram compatibility issue with other hardware.

My Memory Module is 3600 G.SKILL 8GB 1Rx8 F4-3600C16Q-32GTZNC SS 16-19-19-39 1.35v
I looked it up and if I'm not super stupid its in the list:
https://download.gigabyte.com/FileList/Memory/mb_memory_x570-aorus-pro_matisse_191231.pdf

Reseat ram and make sure its in the correct spots. Completely clear CMOS then do the following:

Try to rais SOC voltage (under CPU section) to 1.1v and DRAM voltage to 1.45v while keeping speed at 2133. This may help temporarily, but may not.

Sorry but changing the voltage in that menu tells me that my warrent will void, so I don't wanna touch it, 2133 should be stable without rising any value, if its not its a reason to refund the memory

don't wanna be snippy, but you know how vendors react to those kind of mods.


Thats a problem I've in 20 years using pcs never seen and I don't know wtf is going on with my pc

 

[RedLizard]

I don't know if you wanna get some updates with time maybe other people for the future have the same problem.

AMD said that is most likely is a problem due to memory, gigabyte and my vendor said its a CPU issue. So now my vendor will take it and try to reproduce it. If I get a message from them I will post what issue it was.

 

[Juan_Bijero]

Are the ram modules seated in A2 and B2 slots?

 

[Juan_Bijero]

Also, what is the version of Windows 10? Did you install from a CD or did you install from a usb thumb drive using the most recent Windows 10 version?