First build.. need help!!

[bencarter]

Just built my first pc.. not going well XD its all running all fans spinning all sounds.. sounding? But the monitor is just saying no signal 🙁 help???

Part list.
Amd fx 6 core
Gigabyte 78LMT-USB3
Msi 1050 ti
Hyper x fury 8gb
500w aerocool psu

 

[alexoiu]

What components?

 

[Herc08]

Is the monitor turned on? Are all the cables in the right spot? Do you have a GPU? If so, is the monitor plugged into the GPU or motherboard?

 

[bencarter]

All plugged in well from what I can see monitor definitely works because I use the same hdmi and same monitor for my ps4
All plugged into gpu though I have tried in the mobo

 

[Isokolon]

Is your monitor connected via HDMI / VGA / DVI or DP?
Is it connected to the mainboard or to the GPU?
What GPU do you use? Have you connected the GPU to the PSU?
What's your CPU and PSU?

 

[jasonsansburn]

Is your CPU running? Could be a chance that you set the chip in incorrectly, make sure the marked corner of the CPU chip is aligned with the spot on the motherboard, also check that none of the pins on the chip are bent, and are all straight. If they are bent, you can bend them back, but be extremely careful. This is what solved my identical problem on my first build. Follow the other posts on here too, all valid solutions.

 

[bencarter]

I don't really know how to check if the cpu is running or not and it definitely went in the right way I'll have a look at the pins though thank you!

 

[alexoiu]

The board has integrated graphics. Have you tested with graphics card removed?

 

[bencarter]

Had a look at the cpu and it was fine by all accounts.. tested without gpu installed and same problem..any other suggestions?

 

[bencarter]

Started working!!!!! Booting Windows now! So so happy and relieved thank you guys so much!!!

 

[alexoiu]

Good luck with the new setup!