Ok so I'm pretty sure I understand how to do everything step by step but I have one question about it. If i'm using my pc for nothing but gaming and im not overclocking because that looks to complicated to do anyways do I still have to do this step mentioned?
"Step Ten: Test System and Have FUN!!
I recommend testing your system after all of the drivers have been installed and the system has been updated to make sure it is running stable.
Test your system
Run Prime95’s Blend Test for at least one hour and use one of the following programs to monitor your temps; Real Temp, SpeedFan or Core Temp. This will help determine if you system is running too hot and is unstable.
Run 3DMark’s Vantage or 3DMark06 to benchmark your system to see how your new build compares to similar systems.
Option: Run MemTest86+ for seven passes to check your memory for any possible errors. This isn't required unless you think there might be an issue with your memory."
I would try to learn how to overclock it properly but as I only have a 430W psu i'm not even going to attempt it until I upgrade it.
"Step Ten: Test System and Have FUN!!
I recommend testing your system after all of the drivers have been installed and the system has been updated to make sure it is running stable.
Test your system
Run Prime95’s Blend Test for at least one hour and use one of the following programs to monitor your temps; Real Temp, SpeedFan or Core Temp. This will help determine if you system is running too hot and is unstable.
Run 3DMark’s Vantage or 3DMark06 to benchmark your system to see how your new build compares to similar systems.
Option: Run MemTest86+ for seven passes to check your memory for any possible errors. This isn't required unless you think there might be an issue with your memory."
I would try to learn how to overclock it properly but as I only have a 430W psu i'm not even going to attempt it until I upgrade it.