Fujitsu P910 Beep codes

[ljandre.02]

Hello, my pc Fujitsu P910 specs: I5 3470 10gb ram Nvidia geforce GT730, every time i start it up, i get beep codes, 2 short, then 4 short, after beep codes computer starts and boots to windows and works without any problems, i can not figure out what is wrong with pc that it gives me beep codes, it is really loud and annoying when i turn it on. Anybody know what it could be?

 

[The Paladin]

the Fujitsu ESPRIMO P910 E85+ doesn't seem to have a "error code listing" in any manual., if you boot to bios, is it AWARD or Phoenix ?

 

[ljandre.02]

phoenix bios, motherboard Fujitsu D3162-A1

 

[The Paladin]

http://www.bioscentral.com/beepcodes/phoenixbeep.htm

you sure its 2 short then 4 short ?

 

[ljandre.02]

Yes it is 2 short then 4 short then pc boots to windows with no problems

 

[The Paladin]

well according to everything I read, any bios error code on a Phoenix bios starting with 2 beeps is a ram error, which you could be hearing as 2-4-2, I would run a MEMTEST86 on your system and see what it says.

unless what your hearing is actually a 1-4-1 series as you interpret as 2-4. which isn't any better… run the MEMTEST86 and see.

1-4-1 , Address line failure, The address line to the first 64KB RAM has failed

memtest86 can be found --> https://www.memtest86.com/