FX 8350 and M4A89GTD PRO/USB 3

[tomturbo_005]

Hi guys, I am new here.

I know lots of topic have been opening about this but I read almost all of them but still I am confused about it. I have M4A89GTD PRO/USB 3 mobo but I cannot overlock my 1100T. Neither voltage nor FSB clock speed. It always freezing within any change (even 0.01 change). So I decided to upgrade my system to FX 8350 but some questions in my mind. If you help, I will be happy.

My system below :

AMD Phenom II X6 1100T 3.3GHz
16GB DDR 1333MHz ram
ZOTAC GTX 670 (680 PCB)
AKASA 600W Power Supply
120 GB ASUS 850 EVO SSD
2TB TOSHIBA HDD (7200RPM)
1TB SAMSUNG HDD (5400RPM)
24.5" Vestel Monitor (1920 x 1080)

So there are two photos from CPU-Z :

Also I am using BIOS version of 3029. It loaded at Çizgi Elektronik (Turkey).

If we come to my questions :

1) Is it necessary upgrade for my PC ?

2) If I take FX 8350, does it with my mobo ?

 

[Calvin7]

M4A89GTD PRO/USB3 was available at retailers when the first AM3+ CPUs were introduced in 4th quarter 2011. Gigabyte offered "Beta support only" for the early Bulldozer model AM3+ CPUs. Beta support only meant many regular BIOS options were no longer available. Beta BIOS version was 3027 and was released for use of the Bulldozer Microarchitecture, Zambezi Processor core AM3+ CPUs. The Microarchitecture Piledriver, Processor core Vishera models such as FX-8350 are not supported on that motherboard.

 

[tomturbo_005]

I see but I saw this on the net :

The link is : http://bit.ly/2DIJFsp

I need to verify by someone to sure.

 

[GhislainG]

Make sure you have BIOS 3029 or newer and then give it a try. http://www.cpu-upgrade.com/mb-ASUS/M4A89GTD_PRO_USB3.html (partially supported).