G
Guest
Guest
Archived from groups: alt.comp.periphs.videocards.matrox (More info?)
Hallo
I have a few questions:
Is ist true that you can put an old type G400 (MTHA32G, 906-01 Rev A)
into an ASROCK K7S8X without damaging borad or card? (There is a warning
labal on the AGP-port of the board: no 3.3V Card -> damage!!! )
If it doesn't work it's ok, but i don't want to 'burn' my hardware!!
Is ist true that the old G400 are Univeral AGP Card's (4x 2x 1x 3.3v
1.5 v) with a bug?
Is it true that you can fix the bug by connecting the free resistor R68
by a blank wire (or something else)?
The left pin of my R68 is conneceted to the ground and the rigth pin is
connectet to pin A2 (=TYPEDET#, the second one from rigth on the back
side of the card)
hm, that looks like the R 68 trick may work
It's said that a r68 patched G400 still works fine on 3.3v system. is
that true?
Is there anyone with that card/board comibantion?
Is there anyone with tried to put the old G400 into a K7S8x?
Do you know a good website with tips to that topic?
(Attention:
as far as I know new G400 may be labeled MTHA4X32G or 906-02)
Ciao, Andreas
----
Hallo
I have a few questions:
Is ist true that you can put an old type G400 (MTHA32G, 906-01 Rev A)
into an ASROCK K7S8X without damaging borad or card? (There is a warning
labal on the AGP-port of the board: no 3.3V Card -> damage!!! )
If it doesn't work it's ok, but i don't want to 'burn' my hardware!!
Is ist true that the old G400 are Univeral AGP Card's (4x 2x 1x 3.3v
1.5 v) with a bug?
Is it true that you can fix the bug by connecting the free resistor R68
by a blank wire (or something else)?
The left pin of my R68 is conneceted to the ground and the rigth pin is
connectet to pin A2 (=TYPEDET#, the second one from rigth on the back
side of the card)
hm, that looks like the R 68 trick may work
It's said that a r68 patched G400 still works fine on 3.3v system. is
that true?
Is there anyone with that card/board comibantion?
Is there anyone with tried to put the old G400 into a K7S8x?
Do you know a good website with tips to that topic?
(Attention:
as far as I know new G400 may be labeled MTHA4X32G or 906-02)
Ciao, Andreas
----