Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)
I have just installed a GA-7N400-l Motherboard with a Athlon XP 2200+
processor on Windows XP Professional all is working fine except when
I go to the General tab in the control panel the processor shows up as a
Athlon XP 1500 +
In the jumper settings I left th "CLK_RATIO" and the "CLK_SW" to the default
settings, should I change these and any hints as to what too..?
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)
On Sun, 30 May 2004 13:36:00 +1000, "Thomas Blake"
<thomasblake@optusnet.com.au> wrote:
>
>
>I have just installed a GA-7N400-l Motherboard with a Athlon XP 2200+
>processor on Windows XP Professional all is working fine except when
> I go to the General tab in the control panel the processor shows up as a
>Athlon XP 1500 +
>
>In the jumper settings I left th "CLK_RATIO" and the "CLK_SW" to the default
>settings, should I change these and any hints as to what too..?
>
>Thanks for any help...
>
>Flick the CLK_SW after first shutting down of course!
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)
Hi,
Thomas Blake wrote:
> In the jumper settings I left th "CLK_RATIO" and the "CLK_SW" to the default
> settings, should I change these and any hints as to what too..?
as far as I know the 2200+ works with FSB 266 (133 MHz). The CLK_SW is
on default set to "100 MHz" (to protect older CPUs). If you want the
board to run the CPU properly on 133/266 MHz you should change that SW
to "AUTO". The others are OK.
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)
Suggest you read the manual.
Henny
"Thomas Blake" <thomasblake@optusnet.com.au> wrote in message
news:40b956a1$0$8986$afc38c87@news.optusnet.com.au...
>
>
> I have just installed a GA-7N400-l Motherboard with a Athlon XP 2200+
> processor on Windows XP Professional all is working fine except when
> I go to the General tab in the control panel the processor shows up as a
> Athlon XP 1500 +
>
> In the jumper settings I left th "CLK_RATIO" and the "CLK_SW" to the
default
> settings, should I change these and any hints as to what too..?
>
> Thanks for any help...
>
>
Facebook
Twitter
Instagram