stefjohn2k17 :
tsnor :
When you launch the game does it change the screen resolution / refresh rate to something your monitor cannot support ?
Suggest you go into setting for your game and update display to the lowest setting you can configure and see if suddenly it works. If so you can change to default and see if the game detects your monitor correctly and sets up video correctly.
Could also be driver problems that are triggered when a game flips into 3D mode. Uninstall you video drivers and load new ones from nvidia web site.
Post brand and model of your "600W" PSU. There are no label police for PSUs and many $30 PSU labeled 600w can't actually deliver 300.
No it doesnt change anything. It loads and as soon as I get in the main menu it just "shuts down"
I tried installing the newest drivers. The same thing happens.
I even tried to test the GPU with Funmark and the same thing happened :/
As soon as the monitor shuts down tho, I can hear a "disconnecting" sound (Just like when u disconnect a USB stick) and when I restart I get a message like "The gpu driver has failed. The basic driver is being used. Please check if there is a newer driver available"
The PSU is a EVGA 600W White.
Ohhhhhhh ""The gpu driver has failed. The basic driver is being used. Please check if there is a newer driver available""
Get a copy of EVGA Precision or MSI Afterburner or other overclocking software. This software is usually used to INCREASE performance (overclock), but you are going to use it to UNDERCLOCK the settings of your 780 Ti.
Set the clocks and memory timing for your 780 Ti about 20% SLOWER than stock clocks.
Now test your PC again.
If it fails again at 20% underclock then
1. clean uninstall nvidia drivers
2. uninstall any "gaming experience" type software that might be adjusting driver settings.
3. reboot to load generic microsoft drivers
4. load latest nvidia drivers.
If it works at a 20% underclock then gradually work the clock speeds back up again until you find a speed that is stable, no "The gpu driver has failed." messages.
I've had problems before (with an HD7850) and have seen similar failures on forums where a vide card can no longer run at its factory set frequencies. Slowing it down can allow it to run.
Good Luck.