Question Geforce GTX1050 TI on a Gigabyte H81M-S2H (F2) Motherboard (Not working)

[mpstevens]

Hi
I've installed a Geforce GTX1050 TI on a Gigabyte H81M-S2H (F2) Motherboard.

When i plug in the DVI to the GTX1050 TI all i get is a blank screen.
If i plug the DVI back into the built in motherboard and access device manager the GEforce GTX is listed but showing an exclamation mark!

I have downloaded the Geforce drivers and Experience but still unable to get the GTX to work.
It won't allow me to boot to the Bios either with the GTX when using the onboard graphics?

Perhaps the motherboard is incompatible with the GTX 1050 TI

Any help would be appreciated.

 

[rgd1101]

new or used gtx 1050 ti?

 

[mpstevens]

The Graphics card has been taken from another PC which works fine in that one.

I have attached the GPU-Z links for both the built in Graphics and also the Nvidia Geforce 1050Ti

I notice in my Bios when i remove the 1050ti that i have a couple of options under "Peripherals"

Initial Display Output : IGFX or PCIe 1 Slot
XHCI Mode : Smart Auto / Auto / Enabled / Disabled /Manual
Intel Processor Graphics : Disabled or Enabled

Intel HD 4600 (Motherboard Graphics)
http://gpuz.techpowerup.com/19/09/28/fxq.png

http://gpuz.techpowerup.com/19/09/28/fxq.png

Nvidia Gforce GTX 1050 Ti http://gpuz.techpowerup.com/19/09/28/k3a.png

http://gpuz.techpowerup.com/19/09/28/k3a.png



Many Thanks

 

[dotas1]

Have you upgraded to the latest BIOS?

 

[mpstevens]

Have you upgraded to the latest BIOS?

I downloaded the Gigabyte app which allows you to update the bios via their servers however it didn't download anything.
I think the Bios version i am using (F2) may be the latest.

 

[mpstevens]

Could it be anything to do with UEFI as i notice that the Bios version is blank and the UEFI is unticked on the GPUZ screenshot for the Geforce 1050ti ?