CPU: Ryzen 1700x
Ram: Kingston's HyperX Fury 2x8gb
GPU: 1070 FE
SSD: 960 Pro
CPU cooled by X62 Kraken
Powered by 750w HXi 80+ Plat
Recently updated bios, Upon reboot no issues. Rebooted into bios to attach over clock, realised for some reason my stable ram oc was no longer stable. Had to up my voltage from 1.34v for 2133 to 2666 to 1.35v. Seemed stable. Rebooted one last time to make sure all other bios settings were good. CPU was on 4ghz at 1.45v. These were the same OCs prior to the update except for the slightly higher voltage on ram.
After that 3rd reboot, it started to no post and loop. But not normal. Shut off start up loop. The status/ error code reader, it would do the CPU first, then as soon as it got to the DRAM it would flicker and go back to CPU. I tried to unplug. A stick, and try the one, in 2 different slots. Then swapped. With both sticks it did the same thing.
Thinking bios issues, I cleared CMOS. Still no hope. Switched to back up bios and still same loop. Now main bios won't even try. It reads code 00 for 20 seconds. then loops in backup bios.
Ram: Kingston's HyperX Fury 2x8gb
GPU: 1070 FE
SSD: 960 Pro
CPU cooled by X62 Kraken
Powered by 750w HXi 80+ Plat
Recently updated bios, Upon reboot no issues. Rebooted into bios to attach over clock, realised for some reason my stable ram oc was no longer stable. Had to up my voltage from 1.34v for 2133 to 2666 to 1.35v. Seemed stable. Rebooted one last time to make sure all other bios settings were good. CPU was on 4ghz at 1.45v. These were the same OCs prior to the update except for the slightly higher voltage on ram.
After that 3rd reboot, it started to no post and loop. But not normal. Shut off start up loop. The status/ error code reader, it would do the CPU first, then as soon as it got to the DRAM it would flicker and go back to CPU. I tried to unplug. A stick, and try the one, in 2 different slots. Then swapped. With both sticks it did the same thing.
Thinking bios issues, I cleared CMOS. Still no hope. Switched to back up bios and still same loop. Now main bios won't even try. It reads code 00 for 20 seconds. then loops in backup bios.
Facebook
Twitter
Instagram