Gigabyte GA-970A-UD3 Socket AM3+ 970 ATX AMD Motherboard Help Please!!

[michael06]

Hello yall I just built me a New Gaming Computer on Sat & im having trouble with some things here is the spec of my PC

Gigabyte 970A-UD3 Socket AM3+ 970 atx amd motherboard


Amd Phenom II X4 840 Quad-core Processor 3.2Ghz Overclock it to 3.8ghz


Corsair
Hydro Series H70 High Performance Water CPU Cooler


Patriot G Series Sector 5 4Gb DDR3-1600mhz
Timing 8-9-8-24


EVGA Nvidia GeForce GTX 560 Superclocked 1GB GDDR5 Graphic Card


Hitachi 500Gb 7200rpm 16MB Cache Sata 3.0Gb/s 3.5 Internal
hard drive


Ocz ModXStream Pro 700Watt ATX Power Supply


Antec Gaming Case W/ Blue Neon Lights


LG 22x Dvd Burner+Dual Layer


I got everything set up & im looking at the amd overdrive & I look into the GPu Status & my graphic card is not operating on amd overdrive!! I open up a different program called Cpu-id & my graphic card is showing it working & the clock setting is at 0mhz & Shader Clock 0mhz I need help setting it up & try to go into bios to find the setting of it but cant find it no where!! Also on my motherboard my usb keyboard keeps shutting off & on & I go to look on Amd Overdrive the Diagram & my PCIe is not showing also my other usb is not showing on the diagram!! Can someone help me out I would post pic but i dont see how to attach them or even try to show yall what problems im having!!

 

[scout_03]

did you have question mark in control panel under peripheral added use gpu-z and report what you got http://www.techpowerup.com/gpuz/

 

[michael06]

ya its haves a question mark right now

 

[scout_03]

then driver must be missing

 

[michael06]

oh ya so on that Gpu-z if it haves a question mark next to the bus interface 2.0x16@x16 1.1 ? is that the question mark your talking bout?

 

[scout_03]

see the graphic card as pci-e 1.1 so get new driver and check bios setting

 

[michael06]

Ya I see the pcie 1.1 with the question mark!! The thing tough is that I downloaded the new driver for the graphic card & i use the gigabyte driveragent & its saying the driver for the graphic card is old... everything below saying they are old also I already updated bios but dont know what settings to change if you can help me out? here the things that saying that old & not showing my diagram

IDe ata/atapi controllers
standard dual channel pci ide controller old
standard dual channel pci ide controller old

Disconnected Devices
Generic PnP Monitor Old
Hid- Compliant Mouse Old
Usb Input Device Old

I dont know why all this says old? everything else is check green meaning that the driver or something is good!! what can I do?

 

[scout_03]

try the windows update to if it get new driver

 

[scout_03]

also witch os 32 or 64 win 7 or other

 

[michael06]

Ya I have done that a couple times after I updated bios & everything else lol im just bout to throw this *** out the window it shows there a 8 errors & cant fix the damn thing some how idk whats going on with it? I had the computer overclock to 3.8ghz now its suppose to be 3.2ghz now I reset the bios back to normal not sure if im overlcoking it right but it showed that it worked & i let my computer run for awhile then it just goes up & down the 3.8ghz so now its back at 3.2ghz but its showing 3.22ghz suppose to b 3.2!!

 

[michael06]

I have Window 7 64 bit

 

[scout_03]

ok now did you went to windows update if not log on gigabyte asia for driver i am already having that open

 

[michael06]

Yep already went to windows update & no drivers to update at all!! Can you sign up at gigabyte cause I cant find it no where to register at?

 

[scout_03]

what driver number you got for the amd chipset

 

[michael06]

I dont have the Amd Chipset installed i thought that was only for FX processor? The one i downloaded last night is a ati catalyst verison 03.00.0765!! Do I install this for the amd phenom 2 x4 processor?

 

[scout_03]

catalyst is for graphic card chipset driver is for cpu and got 8.71 as number

 

[michael06]

oh ya So do I install that for the Nvidia graphic card? is there a chipset driver im suppose to get or? the one i downloaded is a motherboard driver amd chipset 8 series win 7 that the catalyst driver

 

[scout_03]

the chipset was in 2010 with number 8.71 and catalyst driver for are for ati card so remove any catalyst driver and load nvidia driver for the gtx 560

 

[michael06]

oh ya well i dont have any ati catalyst drivers installed only the gtx 560 nvidia graphic but its showing on the gigabyte driveragent that the following things are old see here a list

Nvidia Geforce gtx 560 graphic old

IDe ata/atapi controllers
standard dual channel pci ide controller old
standard dual channel pci ide controller old

Disconnected Devices
Generic PnP Monitor Old
Hid- Compliant Mouse Old
Usb Input Device Old

I dont know why all this says old? everything else is check green meaning that the driver good but idk bout to throw this *** outside lol

 

[scout_03]

i will give you something else try this and it's free working good just use the translator http://www.touslesdrivers.com/ install the plugin ma config and then get back to tout les drivers.com and auto detect you will be suprise that this site found for driver missing

 

[michael06]

So what do I download what am i looking to download what file? there so many files to choose from to download!!

 

[scout_03]

you got the plug in install and site detect new driver then always load the latest one that report to the parts you have

 

[michael06]

Hey bud can you send me the link what to download i dont know what to download? I already have a driveragent already installed i can auto detect that & it tells me what the problems Is then when i try to download the driver it goes to another page saying buy the software i dont wanna do that!! if you can send me a like to my email Raildawg2006@yahoo.com I would appreicate it

 

[scout_03]

i will give you something else try this and it's free working good just use the translator http://www.touslesdrivers.com/ install the plugin ma config and then get back to tout les drivers.com and auto detect you will be suprise that this site found for driver missing
also remove drive agent

 

[michael06]

Bro what is a translator? I dont see the plugin ma config im suppose to install anywhere im confused on this link & ok i will remove drive agent