I FOUND IT, i finally found a fix to this rattling noise gigabyte GPU's are making!
If you dont know what i mean when i say this, linked below is a video clip of mine, its awful, as you can see!
https://streamable.com/vr66y8
I had this sound out of the box and struggled for days with it, until i finally came to the fix. and its really simple!
View: https://imgur.com/a/XlGxv5G
If you look closely on the right hand side of the card here you can see i have made a small gap between the two pieces of plastic. To fix this issue, all that is needed is to make this gap in your own card (out of the box those pieces of plastic are touching, this is what causes the sound) There are no screws to undo, just carefully pull the bottom part of the shroud downwards, away from the top half, you only need to make a tiny gap, so dont go yanking on the card.
just place two fingers on the top half, two fingers on the bottom half and pull the two pieces of plastic apart a tiny bit, as said there are no screws to undo, it is just held in by friction.
I hope this can help someone as i was really about to send the card back as the sound was getting over whelming!
EDIT: below im going to link some diagrams that people have made in this thread to help explain
user: bearion :
View: https://imgur.com/a/xfurcbT#JpnB85X
user Kyugi :
View: https://imgur.com/a/Yf8KJ3S#LbX2T6f
If you dont know what i mean when i say this, linked below is a video clip of mine, its awful, as you can see!
https://streamable.com/vr66y8
I had this sound out of the box and struggled for days with it, until i finally came to the fix. and its really simple!
View: https://imgur.com/a/XlGxv5G
If you look closely on the right hand side of the card here you can see i have made a small gap between the two pieces of plastic. To fix this issue, all that is needed is to make this gap in your own card (out of the box those pieces of plastic are touching, this is what causes the sound) There are no screws to undo, just carefully pull the bottom part of the shroud downwards, away from the top half, you only need to make a tiny gap, so dont go yanking on the card.
just place two fingers on the top half, two fingers on the bottom half and pull the two pieces of plastic apart a tiny bit, as said there are no screws to undo, it is just held in by friction.
I hope this can help someone as i was really about to send the card back as the sound was getting over whelming!
EDIT: below im going to link some diagrams that people have made in this thread to help explain
user: bearion :
View: https://imgur.com/a/xfurcbT#JpnB85X
user Kyugi :
View: https://imgur.com/a/Yf8KJ3S#LbX2T6f
Last edited: