[SOLVED] GPU HDMI port won't align with the case

[Thriliya]

As the title suggests, The GPU HDMI cable won't fit with the GPU HDMI port because the port doesn't align with the case.

GPU : Gigabyte Gaming RX 580 8GB
Casing : Golden Field G9B

What options do I have to fix it?

 

[boju]

Can you show a picture

 

[lvt]

It should work even when the connector isn't completely inserted.

 

[Thriliya]

Can you show a picture

Pictures are provided already. Check the original thread

 

[boju]

Pictures are provided already. Check the original thread

I see them. Grind a bit of the plastic away to fit. There's a lot of plastic there so don't worry about getting close to wires because they're far from it toward the back.

 

[Thriliya]

I see them. Grind a bit of the plastic away to fit. There's a lot of plastic there so don't worry about getting close to wires because they're far from it toward the back.

Did this. Removed the excessive plastic carefully and now it fits. Thank you everyone <3

 

[Thriliya]

It should work even when the connector isn't completely inserted.

It works but the connection gets lost frequently because of loose connection.

 

[Paperdoc]

On many devices that mount with panels exposed in the rear slots there is some "slack"' in the side-to-side position of the back plate of the card that is exposed in the cutout. If you loosen slightly the screw that holds that plate in place against the rear panel, you can slide that back panel of the card sideways to get a better alignment of it in the cutout hole, then re-tighten the screw.