[SOLVED] Graphics card just won’t fit

[Olziq]

So I just recently got a new graphics card, and no matter what it just can’t seem to go in properly no matter what I do. Although online I keep seeing that it should fit. I’m not sure which parts are incompatible, whether it be my case, motherboard, or graphics card, or if I’m just doing it wrong. Any help would be amazing! Here is my part list if it’s indicative of anything

https://pcpartpicker.com/list/CRspJf

https://imgur.com/a/6CZ0VGz

View: https://imgur.com/gallery/6CZ0VGz

 

[XxDarkMario20xX]

Stop trying to get it to fit into case just incase you do break something?. Also that screw that attches gpu to the case try removing it and place gpu into slot?

 

[SkyNetRising]

It's this part, that's interfering with pc case.
Bend the metal plate slightly (just the tip of it).

 

[Olziq]

Whats the name of your desktop case also stop trying to get it to fit into case just incase you do break something?

NZXT S340 ATX Mid Tower, I have been pretty careful not too force anything, although unfortunately I did break off the pcie lever earlier as the card got stuck inside.

 

[Olziq]

It's this part, that's interfering with pc case.
Bend the metal plate slightly.

What exactly do you mean? Bend the case or the metal on the graphics card? And that’s what I’ve been thinking, I just haven’t been too sure what to do.

 

[XxDarkMario20xX]

NZXT S340 ATX Mid Tower, I have been pretty careful not too force anything, although unfortunately I did break off the pcie lever earlier as the card got stuck inside.

I did that with my 3090 broken the pcie lever was shaking like mad but did fix it lol but person above is correct looks like metel bar is blocking gpu from fitting in

 

[Olziq]

Stop trying to get it to fit into case just incase you do break something?. Also that screw that attches gpu to the case try removing it and place gpu into slot?

I think I know which screw you’re talking about, but that shouldn’t be in the way of the graphics card, the problem seems to be on the metal on the right side of the card in the pictures. It’s just not going down in between the case and motherboard as it should.

 

[SkyNetRising]

What exactly do you mean? Bend the case or the metal on the graphics card? And that’s what I’ve been thinking, I just haven’t been too sure what to do.

This thing:

 

[Olziq]

This thing:

Ok thanks I will try to bend it slightly

 

[XxDarkMario20xX]

Ok thanks I will try to bend it slightly

Good Luck hope it dose fit in!

 

[Olziq]

This thing:

Yea this didn’t seem to have any effect on it, I tried bending it the best I could without breaking anything

 

[XxDarkMario20xX]

You could always try buying an front mount and have gpu look like this

 

[SkyNetRising]

Yea this didn’t seem to have any effect on it, I tried bending it the best I could without breaking anything

You probably tried bending it to other direction.
The tip of the metal plate has to be aligned with hole in pc case.
If it's not aligned, card doesn't go in properly.

 

[Olziq]

You probably tried bending it to other direction.
The tip of the metal plate has to be aligned with hole in pc case.
If it's not aligned, card doesn't go in properly.

Oh I see what you’re saying, it should be going in fine though, I might just have to take it apart and get a better look

 

[Fiorezy]

You need to take out 2 metal parts from the case that aligns with the GPU ports, sometimes they are attached by screws and in other cases you need to break them