I've had my computer for around 9-10 months, and I have not changed any components, everything has always worked just fine. My computer was working just fine one day, and then I brought my computer to a different house(it might have moved a little while in the cat but it did not hit anything hard or shake around a lot, I only bring it a couple streets over). So when I go to set it up, I get no display. I did a bit of surfing on the internet and starting checking each component. Turns out it was my GPU, and Rx 480. When I unplugged the power cable on my GPU, and used the default video card in the CPU or whatever, everything worked fine. Is there anything I can do to try and get my GPU working again? Or is it for sure dear and I should just get a new one? Here are my special:
CPU: i5-6600k
GPU: Rx 480 (I think its 8gb but maybe 4)
Motherboard: Intel Z170A PC MATE
2TB HDD
2x4gb ram sticks
My CPU is running at a fine temperature.
And one more thing that might be important: while my GPU was still hooked up (after I started getting no signal, idk about before), when I turned on my PC the fans on the gpu would spin for a few seconds then stop then spin then stop then after some number of cycles of doing that they would just stop altogether.
CPU: i5-6600k
GPU: Rx 480 (I think its 8gb but maybe 4)
Motherboard: Intel Z170A PC MATE
2TB HDD
2x4gb ram sticks
My CPU is running at a fine temperature.
And one more thing that might be important: while my GPU was still hooked up (after I started getting no signal, idk about before), when I turned on my PC the fans on the gpu would spin for a few seconds then stop then spin then stop then after some number of cycles of doing that they would just stop altogether.