GTX 1050 msi 2g

[varlagas99]

hi
(my pc it's old I know)
"EP43-DS3L"
"Intel e8400 3.4Ghz overclock"
"ddr 2 ram 8g"
"ssd 125g"
"power supply 650corshair"


I do not think I forget something, so I get this card msi 1050 2g and I do not even read it again and I used to put the old one that I got gtx 9600gt do you know anything because it does not read anything?


sorry for my English

 

[Barty1884]

If I understand the issue, a 1050 does not show any display out for you when paired with an E8400 setup?

There's likely BIOS issues with the support, given it's age.

Realistically, it's likely a blessing in disguise. A 1050 paired with an e8400 and DDR2 is likely going to be crippled a lot of the time.

 

[zyh1987]

Did you swap the cards? Or did you add the card into another pcie slot, the board should run 1050 without any issue. Ca. You verify if the 1050 is a working card?

 

[varlagas99]

Did you swap the cards? Or did you add the card into another pcie slot, the board should run 1050 without any issue. Ca. You verify if the 1050 is a working card?

removes 9600 and I put 1050 and did not work, windows 7 sounded open normally, but the screen also did not show the lights on the card and the fans operated

 

[varlagas99]

If I understand the issue, a 1050 does not show any display out for you when paired with an E8400 setup?

There's likely BIOS issues with the support, given it's age.

Realistically, it's likely a blessing in disguise. A 1050 paired with an e8400 and DDR2 is likely going to be crippled a lot of the time.

do you think he does not read it from the bios?

 

[zyh1987]

Did you swap the cards? Or did you add the card into another pcie slot, the board should run 1050 without any issue. Ca. You verify if the 1050 is a working card?

removes 9600 and I put 1050 and did not work, windows 7 sounded open normally, but the screen also did not show the lights on the card and the fans operated

and i assume that you can't see bios screen either? any friend / family member are willing to let you test the gfx card on their motherboard? i still think it's the gfx's card issue.

 

[varlagas99]

Did you swap the cards? Or did you add the card into another pcie slot, the board should run 1050 without any issue. Ca. You verify if the 1050 is a working card?

removes 9600 and I put 1050 and did not work, windows 7 sounded open normally, but the screen also did not show the lights on the card and the fans operated

and i assume that you can't see bios screen either? any friend / family member are willing to let you test the gfx card on their motherboard? i still think it's the gfx's card issue.

the card is new, I can not give the bios .. thank you for your interest though ... when asked that they should want to refresh the bios ... without being sure