Hi everyone I bought a Kingston nvme 4 ssd and installed it, but wasn’t getting any signal, 4 hours later I switched gpu and got a signal on a hd6450 that’s close to its end. After some time I put my 980 back in and still getting nothing. So I take it out to look at it and there’s somehow water in the graphics card, which makes no sense as my aio isn’t leaking (but there is a weird noise coming from what I think is the pump but the noise isn’t consistent, it’s like once every 3ish seconds like a grinding noise) but it hasn’t leaked. The water was on the thermal pads and on the vrms (I think) and near power regulators. The gpu was working completely fine before the ssd installation so I’m lost for words here as to what’s ended it. I have the msi b550m vdh wifi, rm750x, r5 5500. 2 ssds are in use and 2 hdds are as well. I did have the gpu daisy chained and one of the 6 pin gpu pwr connector pins are pushed back slightly but that’s fine as well so I’m so confused. I have no spare parts apart from the gpu. Please help me fix this. Thank you. (Also the psu is just under 2 years old) (I can’t upload pictures as imgur won’t let me login as I get a server full error when doing so but will update this with pictures when it works again. Thanks)