Guide to overclocking the A64

[imsochobo]

Well here is my results so far:
Amd 64 4400+ 2.2 ghz 2mb cache 939
OCZ pc4000 3-3-2-8 standard one chip is down, so i run at a single 1gb till i get one back from ocz
Timings @ 564 mhz is 3-3-2-5, which is indeed incredible actually.
I made some adjustments to the fsb mem ratio to something cant remember what 16666667% over fsb or something in that direction got a 450 mhz overclock fine, till one core overheats due to waterblock abit, not in right place, and no coolingpaste.

Not dissapointed at all at amd systems in oc: theese are the overclocked systems i have built

Abit nf-8 a 64 3000+ 512 cache 754 @ 245-255 fsb, depending on outside temperature, (very high i guess)

Dfi lanparty-ut nf4 sli
a 64 939 3200+ 400 mhz overclock not 1 bluescreen in 2 years now (corsair memory pc3200 cl2 memory)

Dfi lanparty-ut nf4 sli a64 3700+ @ 300 mhz oc 2 years no bluescreen (0.25 v+ cpu)

 

[jelecdr]

heloo!!!just register on this site.my english is not so good but i hope so that you will understand me.I have MSI K9N neo AND OPTERON 1210.I flashed bios with msi 570 ultra before one our and its working.could not get more than 2150 on stock bios.Now i am on 2600.Cant find the site where someone said that msi platinum bios is better because detection of cooler rpm is ok.Can someone tell me what version of platinum bios is.I would like to flash again.

 

[mirceaizvoran]

MSI has lots of K9N series Motherboards. ex:K9N-SLI, Platinium, etc....name your model

 

[mirceaizvoran]

Problem overclocking my Opteron!!! I have an Opteron 165 1.8 Ghz. I used to overclock it up to 2.7 Ghz and the performance was GREAT!!! I had 2*512DDR400 PQI CL2.5 double-sided. All i had to do was to decrease HT speed from default to 4x, decrease from DDR400 to DDR333 and increase the FSB.
Now, I bought 2*1GB Kingston pc3200-KVR400x64c3a CL3 and sold the old ram....problem is that the new ram doesn't let me put the frequency to DDR333...only DDR266.the CPU runs fine at 2.7 Ghz...but performance is barely at 8%....how stupid of me to sell my old ram 🙁

Can someone PLEASE tell me settings to apply with the new ram?....there must be a possibility to get performance with my new ram.

Thanks in advance

 

[goldenfire]

How to overclock Phenom 9750 2.4Ghz using Motherboard A-Bit A-S78H ?

Specs:
Processor : Phenom 9750 2.4Ghz (12x multiplier max, FSB 200)
Mobo : A-Bit A-S78H
Ram : 8GB Corsair DDR2 PC8500 XMS2
Graphic Card : ATI HD2600XT GDDR3
System : Windows XP64

All I already to do is increase the FSB to 202 (Very little) and cannot boot. other bios setting is default, i changed only Ram Voltage (2.1 volt) and 4-4-4-12 as factory suggest.

Note: many setting in A-bit A-S78H for overclock.

I'm newbee,and thanks in advance for anybody can help me to overclok my PC.

 

[randomizer]

This topic has been desticky in top of the forum by Randomizer

 

[sumpattn]

Hi Speeduk,
I was trying to get through the detailed on over clock. As I am very new to this concept unfortunately. I had to quest to optimized my PC to perform better in terms of playing high end games and I found this great concept of over clocking. I really appreciate if you can tell me step by step to over clock the AMD processor.
Details are provided below:
Processor: AMD Athlon 64x2 4000+
MOBO : Asus M2N- MX - SE EDITION
customed CPU cooler: Cooler Master Hyper 212 EVO Cooler
Ram : Transcend 2x2 667 =4GB
GPU : NVIDIA GT520 2GB DDR3

Now As I checked while playing a high end games (BF3) that CPU is hitting to 55 degree temp,

Now I have a request that to what level I can over clock it? to my understanding if I can hit safely to 2.7 GHrz/ core. it seems to be fine for me.

Can you kindly let me know what I should install as a software( Like I have installed CPUZ to monitor details of CPU) and where to go and what changes I need to make it to have a safer level of Overclocking with my system Configurations.

I really had a good trust on your detailed post. so I am asking. I hope you would take a time to help me out. I am pretty excited to have my system performing at higher level.

Please let me know. Best Regards
Suman