H100i problem high temps

[brad_47]

I recently install my corsair h100i v2 liquid cooler. But for some reason it isn't cooling my cpu. I've install it currently and put new thermal paste on the processor and It still continues to overheat. I think the pump is working but still what the heck is the problem. I bought this liquid used from amazon.

Intel I5 4690k
Asus H81 gamer motherboard
Corsair 600w psu
R9 390 Asus strix gpu
Ddr3 8gb corsair vengance

 

[WildCard999]

What temps are you getting? (Idle/Load) Also what program(s) are you using the read the temps?

 

[brad_47]

I'm using the bios to read the temps and as soon as I load up the bios the temps began as 30* then goes up by 1* every second

 

[WildCard999]

Up to what temp?

 

[brad_47]

It's stays between 84 to 90

 

[WildCard999]

Ok here's a few things to check...

-Make sure you applied the correct amount of thermal paste (single grain of rice) evenly over the CPU.
-Double check that the cooler was correctly installed.
-Make sure the pump is running. Should be a small running vibration on the pump. If there is no vibration (or very minor) then more then likely you pump is dead and no water is circulating through the AIO causing the temp to slowly go up which this may be your issue.
-Another possible cause is something clogging one of the lines on the AIO.

 

[brad_47]

The pump seems to be dead as there is no vibration on the aio and warm water doesn't seem to transferring to the radiator