HAF932 front panel replacement issues

Steven Battisti

Honorable
Jul 4, 2013
54
0
10,640
1
Hi folks,

I have a homegrown system with a HAF932 coolermaster case. Recently I started getting "USB over current device" warnings on booting, and I was able to narrow it down to the front I/O panel, which had become damaged.

So, I obtained a new front panel, and installed it tonight. However, I'm having an awful time getting things working again. Part of the struggle is that there were no instructions, but I believe I have plugged everything in correctly, or at least the same way it was plugged in before.

The problem is, now that I have completed the installation, when I press the power button, the fans spin up for about three seconds, and then spin back down. I never get to the BIOS or get the beep or anything.

I am not super-technical, so any suggestions you can give would be helpful. I suspect the most likely answer is I have SOMETHING plugged in incorrectly, so let me know what information I can provide to help.

Here's a pic, although I'm not sure this will help.



Thanks very much!
 

ASK THE COMMUNITY

TRENDING THREADS