I bought a Pre-Build system back in early 2016.
That came with a "TOSHIBA DT01ACA100" a 1TB HDD.
(Which has been partitioned. | C Drive is "151GB free of 344GB")
And i've recently been interested in NVMe SSDs.
My Motherboard the "Z170A PC MATE" Has a M.2 connector.
And supports NVMe drives. So ive been meaning to get one.
However i posses no knowledge on how to/or if i can
Copy everything thats on my HDD C drive onto the NVMe SSD.
These are the 2 drives ive been interested in the most
OH AND ALSO.
Would i need to download any like..Device Driver for the SSD, for it to work.
Or is it same as a HDD.
Just connect it, go to Disk management, and initialize from there.
That came with a "TOSHIBA DT01ACA100" a 1TB HDD.
(Which has been partitioned. | C Drive is "151GB free of 344GB")
And i've recently been interested in NVMe SSDs.
My Motherboard the "Z170A PC MATE" Has a M.2 connector.
And supports NVMe drives. So ive been meaning to get one.
However i posses no knowledge on how to/or if i can
Copy everything thats on my HDD C drive onto the NVMe SSD.
These are the 2 drives ive been interested in the most
- Adata XPG SX8200 PRO 1TB (135 Euro)
- Samsung 970 EVO 1TB (150 Euro)
OH AND ALSO.
Would i need to download any like..Device Driver for the SSD, for it to work.
Or is it same as a HDD.
Just connect it, go to Disk management, and initialize from there.