Headphones' headband is breaking, what can I do?

[Castiel19]

Hello, the headband on my headphones is starting to crack. When I put them on, the band doesn't form a nice ark. It dips in where the cracks are, which luckily have gone all the way through. These headphones, Sentey Warps, have one cord on the left side, so I can't just take the speakers off and plop 'em on another headband. Should I try to fix the existing headband, or go through the trouble of carefully emptying the cords and threading them in another band?

 

[Ironsounds]

Hello... Try some JB weld on them? it's epoxy based... I find it sticks to keyboard/headphone type plastics, when lightly sanded first and cleaned with rubbing alcohol.
It's does not stick to masking or clear tape, so you Can build a bridge of material or create a "No Glue Zone", spread tape over it for a smooth looking Final finish. Place in the sun for quick hardening time and warming of the Epoxy... 12-24 hours done.
The small 2 tube packs are found every where, Epoxy is sandable and paintable too.
http://www.jbweld.com/products/j-b-weld-twin-tube

 

[Castiel19]

Hello... Try some JB weld on them? it's epoxy based... I find it sticks to keyboard/headphone type plastics, when lightly sanded first.
It's does not stick to masking or clear tape, so you Can build a bridge of material or create a "No Glue Zone", spread tape over it for a smooth looking Final finish. Place in the sun for quick hardening time and warming of the Epoxy... 12-24 hours done.
The small 2 tube packs are found every where, Epoxy is sandable and paintable too.
http://cds.a9t2h4q7.hwcdn.net/main/items/media/JBWEL001/ProductLarge/251-1005J-BWeld.jpg

Thanks for replying, I'll try that.