Set up:
4770k CPU
Asus Maximus VI Formula
EVGA SuperClocked 770
G.SKILL Sniper Series 16GB DDR 2400
RM850 PSU
XSPC RayStorm CPU block
EK Geforce GTX 770 GPU block
1/2" Rigid acrylic tubing
1 Alphacool VPP655 pump
1 XSPC AX240 Dual 120mm
1 Alphacool NexXxoS ST30 Full Copper Slim Profile Dual 120mm Radiator
My set up:
I have the pump going to top radiator#1 (push) down to CPU -> GPU -> mobo -> radiator #2 (push/pull)-> resev -> pump.
My question is, is there something wrong with my setup? because the temperature doesn't seem to be right compare to my other PC i5 2500k @ 4.7ghz with just H80i cooling. (that one never see pass 70C under full load for hours with prime) Granted, i understand haswell puts out more heat...
i'm running in the low 40s at idle @4.3 GHZ/1.25 Vcore. Under 100% load i'm sitting at 90s range. I would understand if it was on air, but i'm running water cool. Not to mention I also delidded the CPU as well. The TIM i used was AC5. I've already re seated my IHS and the CPU block too.. I seriously did not noticed any big temperature difference before/after delidding the CPU. almost makes me regret on doing so.
Any suggestions are welcome. I'm just running out of ideas why it's sitting at such a high temp even with pretty decent water cooling system.
4770k CPU
Asus Maximus VI Formula
EVGA SuperClocked 770
G.SKILL Sniper Series 16GB DDR 2400
RM850 PSU
XSPC RayStorm CPU block
EK Geforce GTX 770 GPU block
1/2" Rigid acrylic tubing
1 Alphacool VPP655 pump
1 XSPC AX240 Dual 120mm
1 Alphacool NexXxoS ST30 Full Copper Slim Profile Dual 120mm Radiator
My set up:
I have the pump going to top radiator#1 (push) down to CPU -> GPU -> mobo -> radiator #2 (push/pull)-> resev -> pump.
My question is, is there something wrong with my setup? because the temperature doesn't seem to be right compare to my other PC i5 2500k @ 4.7ghz with just H80i cooling. (that one never see pass 70C under full load for hours with prime) Granted, i understand haswell puts out more heat...
i'm running in the low 40s at idle @4.3 GHZ/1.25 Vcore. Under 100% load i'm sitting at 90s range. I would understand if it was on air, but i'm running water cool. Not to mention I also delidded the CPU as well. The TIM i used was AC5. I've already re seated my IHS and the CPU block too.. I seriously did not noticed any big temperature difference before/after delidding the CPU. almost makes me regret on doing so.
Any suggestions are welcome. I'm just running out of ideas why it's sitting at such a high temp even with pretty decent water cooling system.