Help boot problem

[jsarignaya]

My desktop computer works fine but the problem when i turn it on im having a problem to boot up. Unless i restart over and over just to boot up.

 

[the_ultimate_weeb]

What are the specs of your computer? Do you have an overclock? If so, it could be that you went too far on your overclock. The way to fix this is to open up your pc and just take put the bios battery for a few minutes. That should fix it. If you don't have an overclock I still siggest doing that.

 

[scout_03]

did you check all wiring in and do you have another psu around for test .

 

[jsarignaya]

What are the specs of your computer? Do you have an overclock? If so, it could be that you went too far on your overclock. The way to fix this is to open up your pc and just take put the bios battery for a few minutes. That should fix it. If you don't have an overclock I still siggest doing that.

this my specs
intel i7-6700
amd radeon r9 200 series
asus tuf mark 2
geil evo potenza 2x4gb
powerspec 650w
80gb ssd
250gb hdd

i just did removing the cmos battery and it did run fine but the next day same thing again its hard to boot up i gotta press the restart button until to boot up. when it comes from a fully turn off it always happen

 

[scout_03]

when it boot does it show up current date and time .

 

[jsarignaya]

when it boot does it show up current date and time .

no it didn't i just notice that. do you think that could be the problem?

 

[smorizio]

bad biso or weak cmos battery. try replacing the battery and use the asus usb flashback port to reflash your mb bios.

 

[jsarignaya]

bad biso or weak cmos battery. try replacing the battery and use the asus usb flashback port to reflash your mb bios.

i just did it i thought that solve the problem but when i wait till the next morning problem still exist.

 

[scout_03]

we gone do the front panel power switch test unplug it and momentary touch the 2 pins with a little lens srewdriver and see if it boot on first try .

 

[jsarignaya]

i guess its one of my ram i just removed the other one this morning bout 6am then turn it back on around 1pm and its booting fine for now. so i hope thats solve the problem. but im still gonna observe.

 

[scout_03]

memtest each ram module and if they fail rma you bought them as dual kit .