Question HELP: Computer Won't Start

[DarylEPerez]

Hello all,
Merry Christmas and, Happy New Years to come.

I'd like to get some help on a topic, whether that is manually clocking my ram, or, guidance on steps that may be leading to my issues.

I'm sharing my system so I provide all relevant information ahead:

Motherboard: Gigabyte Aorus Elite WIFI 7 ICE (latest firmware released on Dec 19, 2024)
CPU: Ryzen 9 9900X
Ram: 64GB Team T-Force Delta RGB 32GB (2 x 16GB) 288-Pin PC RAM DDR5 7200 (PC5 57600) Desktop Memory Model FF4D532G7200HC34ADC01
GPU: XFX Merc310 7900XT
Storage: Samsung 1TB nvme Pro | Samsung 2TB nvme Pro

When I first built my PC, I was able to go to bios and select XMP1 (7200) without issues, after installing my 2TB nvme today, I noticed that ram was set at 3600 when I accessed bios to change booting priority between my two nvmes.

I selected XMP1 (7200) and my computer won't load, black screen, motherboard displays CODE: 41, solid RAM light on the motherboard. I flashed my motherboard and tried again, same code.
I then selected XMP2 (6000) and my computer won't load, this time however it loads straight to BIOS and says there is an issue with my computer loading.

I set my RAM at 6800 using auto, but my latency is at 56:56:56:109, which is not where I'd like it to be for gaming.

Here is a link to photos of BIOS, CPU-Z and physical PC: https://drive.google.com/drive/folders/1P0YwjyiHiOJvvsKzrwekZ4zZf7TfXKEu?usp=sharing

Can I please be helped on how to find the sweet spot for my ram?

 

[CountMike]

Hello all,
Merry Christmas and, Happy New Years to come.

I'd like to get some help on a topic, whether that is manually clocking my ram, or, guidance on steps that may be leading to my issues.

I'm sharing my system so I provide all relevant information ahead:

Motherboard: Gigabyte Aorus Elite WIFI 7 ICE (latest firmware released on Dec 19, 2024)
CPU: Ryzen 9 9900X
Ram: 64GB Team T-Force Delta RGB 32GB (2 x 16GB) 288-Pin PC RAM DDR5 7200 (PC5 57600) Desktop Memory Model FF4D532G7200HC34ADC01
GPU: XFX Merc310 7900XT
Storage: Samsung 1TB nvme Pro | Samsung 2TB nvme Pro

When I first built my PC, I was able to go to bios and select XMP1 (7200) without issues, after installing my 2TB nvme today, I noticed that ram was set at 3600 when I accessed bios to change booting priority between my two nvmes.

I selected XMP1 (7200) and my computer won't load, black screen, motherboard displays CODE: 41, solid RAM light on the motherboard. I flashed my motherboard and tried again, same code.
I then selected XMP2 (6000) and my computer won't load, this time however it loads straight to BIOS and says there is an issue with my computer loading.

I set my RAM at 6800 using auto, but my latency is at 56:56:56:109, which is not where I'd like it to be for gaming.

Here is a link to photos of BIOS, CPU-Z and physical PC: https://drive.google.com/drive/folders/1P0YwjyiHiOJvvsKzrwekZ4zZf7TfXKEu?usp=sharing

Can I please be helped on how to find the sweet spot for my ram?

You have my answer in your first post.