Help Installing Windows 10 with a bootable USB on newly built pc.

[l_jones]

I'm currently using a Mac running 10.12. I have a Windows 10 key. I downloaded the ISO file to try boot with that. I read I guide that told me to use a program called Rufus, But it's not available for mac so, I found a similar program called "unetbootin". I converted the USB that I'm using into a bootable device through the program. And booted up my pc. It automatically booted from the USB but all I was getting was this:

(The white _ flashing) Seems to be a common error.

Then seeing as that didnt work I used the BootCamp assistant, but for some reason it said it ran out of space, so that one didnt work. I then found a video on youtube that showed you how to create a bootable drive.
That step resulted in the same error

Now when i try to erase the USB through Disk Utility it says that it can't, unmount the disk and Read the last block.

Any help would be much appreciated, Thanks in advance.

 

[nzalog]

If you use UEFI boot mode all you need to do is extract the ISO onto a fat32 formatted usb drive.

Go into your bios and see if UEFI boot is enabled, it's much simpler than the older MBR stuff.

 

[l_jones]

If you use UEFI boot mode all you need to do is extract the ISO onto a fat32 formatted USB drive.

Go into your bios and see if UEFI boot is enabled, it's much simpler than the older MBR stuff.

So i just put the .iso file onto a USB that's formatted in fat32?

 

[l_jones]

SOLVED : Used Rufus on a PC instead of using unetbootin on mac.