Question Help me identify this type of cooler

[ridwan123]

Hello last time i had a cpu cooler name coolermaster hyper212 LED and i want to ask is it compatible with i7 14700f? not K version.will it cool the i7 14700F ?is any gpu upgrade can put a lot of work to the processor causing more heat ?i want to know if i change the GPU maybe

 

[Ralston18]

Update your post to include full system hardware specs and OS information,

Include PSU: Make, model, wattage, age, condition (original to build, new, refurbished, used)?

Disk drive(s): make, model, capacity, how full?

 

[ex_bubblehead]

You might get it to fit but it's nowhere near good enough to handle the heat.

 

[CountMike]

Hello last time i had a cpu cooler name coolermaster hyper212 LED and i want to ask is it compatible with i7 14700f? not K version.will it cool the i7 14700F ?is any gpu upgrade can put a lot of work to the processor causing more heat ?i want to know if i change the GPU maybe

How old and which socket it was used for ? In any case it's doubtful it could cool i7 14700F sufficiently for full performance. GPU has nothing to do with it, that's question of it's and case cooling.
For that CPU it should have mounting kit for FCLGA1700 socket.

 

[ridwan123]

How old and which socket it was used for ? In any case it's doubtful it could cool i7 14700F sufficiently for full performance. GPU has nothing to do with it, that's question of it's and case cooling.
For that CPU it should have mounting kit for FCLGA1700 socket.

What do you mean mounting kit?

 

[CountMike]

What do you mean mounting kit?

Backplate, bracket and screws.

 

[Misgar]

coolermaster hyper212 LED and i want to ask is it compatible with i7 14700f?

If it's the cooler below:
https://www.coolermaster.com/en-global/products/hyper-212-led/?tab=tech_spec

It seems to fit the following sockets:

LGA2066
LGA2011-V3
LGA2011
LGA1366
LGA1200
LGA1156
LGA1155
LGA1151
LGA1150
LGA775
AM4
AM3+
AM3
AM2+
AM2
FM2+
FM2
FM1

Notable by its absence is the LGA1700 socket for the i7 14700F.

In other words the standard "square" mounting of the Hyper 212 will not fit the "rectangular" hole arrangment of an LGA1700 motherboard.

will it cool the i7 14700F ?

Not unless you're prepared to restrict the power output of the 14700F considerably to, for example, 100W maximum.

This review of the similar sized Hyper 212 EVO:
https://hardwarecanucks.com/cooling-power/cooler-master-hyper-212-evo-review/

states:

at 125W, the 212 Evo starts falling further behind

at 150W the Evo gets overwhelmed since it can’t move heat away from the CPU fast enough, even when its fan is spinning at its maximum level. But look this was pretty much expected since this version of the 212 was never ever designed for this type of heat load.

The review below shows the 14700F dissipating 219W, which is roughly double the rating of the Hyper 212.
https://www.techreviewer.com/tech-specs/intel-14700f-tdp/#tdp-of-the-core-i7-14700f-vs-other-cpus

You'll need a much more capable cooler for the 14700F, e.g. a large dual-tower, dual-fan Thermaltake / Noctua NH-D15 or a 360/420mm AIO.

Scrap the Hyper 212 or use it in a low power rig.

https://www.amazon.com/Thermalright...ake+cooler+air+7+heatpipe,aps,127&sr=8-3&th=1

 

[ridwan123]

Backplate, bracket and screws.

Oh i think that not measure how cooler perfomance is.

 

[ridwan123]

If it's the cooler below:
https://www.coolermaster.com/en-global/products/hyper-212-led/?tab=tech_spec

It seems to fit the following sockets:

LGA2066
LGA2011-V3
LGA2011
LGA1366
LGA1200
LGA1156
LGA1155
LGA1151
LGA1150
LGA775
AM4
AM3+
AM3
AM2+
AM2
FM2+
FM2
FM1

Notable by its absence is the LGA1700 socket for the i7 14700F.

In other words the standard "square" mounting of the Hyper 212 will not fit the "rectangular" hole arrangment of an LGA1700 motherboard.


Not unless you're prepared to restrict the power output of the 14700F considerably to, for example, 100W maximum.

This review of the similar sized Hyper 212 EVO:
https://hardwarecanucks.com/cooling-power/cooler-master-hyper-212-evo-review/

states:

at 125W, the 212 Evo starts falling further behind

at 150W the Evo gets overwhelmed since it can’t move heat away from the CPU fast enough, even when its fan is spinning at its maximum level. But look this was pretty much expected since this version of the 212 was never ever designed for this type of heat load.

The review below shows the 14700F dissipating 219W, which is roughly double the rating of the Hyper 212.
https://www.techreviewer.com/tech-specs/intel-14700f-tdp/#tdp-of-the-core-i7-14700f-vs-other-cpus

You'll need a much more capable cooler for the 14700F, e.g. a large dual-tower, dual-fan Thermaltake / Noctua NH-D15 or a 360/420mm AIO.

Scrap the Hyper 212 or use it in a low power rig.

https://www.amazon.com/Thermalright-PS120SE-TL-C12B-Technilogy-Bearing/dp/B0BNH1W546?crid=KRRU9SRETITC&dib=eyJ2IjoiMSJ9.l7xG4ylWqIMAm1rvA2a3o_s4yc4WT9jpSXJuIo3GX9f65SJTwvmhQw3lHN1eW3mfq55ZcF2-VHP7WTXc99CZmE3bnhE7wI_DPA_vEC-vun8AhyME-RjxSlpJNc9ycvtP3TnmDqovzh2P0Gkbw3jxpDwOpWYuFWPGutRgRe1F_tNQek0tnr1CXL-8IHeS8TOVn2D_Ac_YQenCobvUVN2wgBM-VwEsrHj8cJcfl_gP0DY.vAyqoaj4jjK1k6WwVhCdD0Ys6TGDc6zbf7njIswA-1M&dib_tag=se&keywords=thermaltake+cooler+air+7+heatpipe&qid=1731517174&sprefix=thermaltake+cooler+air+7+heatpipe,aps,127&sr=8-3&th=1

How do you know that hyper212 has maximum handle only 100 w,in coolermaster website it did not show the actual tdp that it can handle ,it only show cpu socket not include lga 1700 but idk why i still can fit in.they did not say it support lga 1700 just the socket.if there is website that show tdp measure in cpu cooler tell me

 

[Roland Of Gilead]

How do you know that hyper212 has maximum handle only 100 w,in coolermaster website it did not show the actual tdp that it can handle ,it only show cpu socket not include lga 1700 but idk why i still can fit in.they did not say it support lga 1700 just the socket

Heed the advice being offered. The Hyper 212 is completely insufficient for that 14700k. Do not use it, even if it has the correct backplate etc.

You need a better cooler. Simples.

If you want something better at a low cost go for either the TT Peerless Assassin or the Phantom Spirit Evo. They will at least have the correct mountings and offer stellar performance for sweet FA.

 

[ridwan123]

Heed the advice being offered. The Hyper 212 is completely insufficient for that 14700k. Do not use it, even if it has the correct backplate etc.

You need a better cooler. Simples.

If you want something better at a low cost go for either the TT Peerless Assassin or the Phantom Spirit Evo. They will at least have the correct mountings and offer stellar performance for sweet FA.

If there is website that show how many tdp that cooler can proceed is good to know

 

[ex_bubblehead]

If there is website that show how many tdp that cooler can proceed is good to know

You need to start listening to the advice you've been given. That cooler is not now, or ever going to be sufficient for that CPU, period.

 

[CountMike]

Oh i think that not measure how cooler perfomance is.

It's how it fits on and is mounted on certain socket motherboards. If it can't be properly mounted, performance is moot point.
One of first indications of coolers capability is CPU's and cooler's stated TDP up to CPU's Tjmax temperature. Further on it's coolers size, number and size of fins and heat transfer pipes and to some extent number of fans on it.

 

[USAFRet]

The Hyper212 line was good, only because it was inexpensive, and marginally better than the stock coolers at the time.
I had one.

Even with a new mount kit, it is not even close to sufficient for that CPU.
Not even a little bit.

 

[ridwan123]

The Hyper212 line was good, only because it was inexpensive, and marginally better than the stock coolers at the time.
I had one.

Even with a new mount kit, it is not even close to sufficient for that CPU.
Not even a little bit.

MAybe watercooler is the way to go 360mm aio.

 

[Misgar]

How do you know that hyper212 has maximum handle only 100 w,in coolermaster website it did not show the actual tdp that it can handle

You are correct. I couldn't find any maximum power specifations on the Cooler Master web site. It's suspicious they don't mention this important fact don't you think?

That's why resorted to checking review sites to see if they provided any clues. After reading several reviews, I still couldn't find any max. power numbers.

Instead, I inferred a nominal rating of 100W from the review I mentioned earlier:
https://hardwarecanucks.com/cooling-power/cooler-master-hyper-212-evo-review/

If you remember, it stated:

at 125W, the 212 Evo starts falling further behind

This I interpreted to mean the 212 was reaching its limits at 125W.

at 150W the Evo gets overwhelmed since it can’t move heat away from the CPU fast enough, even when its fan is spinning at its maximum level. But look this was pretty much expected since this version of the 212 was never ever designed for this type of heat load.

This confirmed the 212 was incapable of cooling 150W.

I then provided a graph showing the 14700F can output 219W (possibly more).

If the 212 starts to struggle at 125W and is overwhelmed at 150W, what do you think will happen if it's asked to cool a CPU capable of dissipating 219W CPU?

The answer is that under load with a 212, the CPU cores will hit the 100 °C "throttle" point and stay there until the load is reduced.

Over-temperature protection will reduce the CPU clock speed and system performance will be adversely affected.

If you don't believe us, fit the 212 to the 14700F, run a stress test and check CPU temperature + clock speed. You'll have to modify the fixing brackets or use a glue gun.

Good luck if you persist with inadequate cooling.

they did not say it support lga 1700 just the socket.

Sorry, but I don't understand what you mean by "just the socket".

The web site for the 212 does not mention support for motherboards fitted with an LGA1700 socket. In other words, it won't fit.

The 212 list includes virtually all the other common and obsolete CPU sockets I can think of (apart from limited support for AM5).

As I said earlier, it seem likely the 1700 is not supported by the ancient 212 design, because this socket has a far more pronounced rectangular outline.

 

[USAFRet]

MAybe watercooler is the way to go 360mm aio.

Liquid is not necessarily needed.

Just not...crappy air, like the 212.

 

[Eximo]

With LGA1366 (80mm) support it is likely it would fit the LGA1700 (78mm) socket layout. While the chip is rectangular the hole spacing is still square. Vertical height may be an issue though, which could be solved with some washers, maybe.

However, that CPU cooler was not intended for more than quad core CPUs, 77-84W range, that existed during its heyday. While the 14700F has a Base power rating of 65W, that isn't what it uses during boost, which is up to 219W. So while I don't think the CPU will overheat exactly, it won't be running at high boost clocks for very long durations. Base frequency is only 2.1Ghz on that CPU.

Given the low cost of CPU coolers from the likes of Thermalright, makes little sense to make the attempt to make it work.

 

[ridwan123]

You are correct. I couldn't find any maximum power specifations on the Cooler Master web site. It's suspicious they don't mention this important fact don't you think?

That's why resorted to checking review sites to see if they provided any clues. After reading several reviews, I still couldn't find any max. power numbers.

Instead, I inferred a nominal rating of 100W from the review I mentioned earlier:
https://hardwarecanucks.com/cooling-power/cooler-master-hyper-212-evo-review/

If you remember, it stated:

at 125W, the 212 Evo starts falling further behind

This I interpreted to mean the 212 was reaching its limits at 125W.

at 150W the Evo gets overwhelmed since it can’t move heat away from the CPU fast enough, even when its fan is spinning at its maximum level. But look this was pretty much expected since this version of the 212 was never ever designed for this type of heat load.

This confirmed the 212 was incapable of cooling 150W.

I then provided a graph showing the 14700F can output 219W (possibly more).

If the 212 starts to struggle at 125W and is overwhelmed at 150W, what do you think will happen if it's asked to cool a CPU capable of dissipating 219W CPU?

The answer is that under load with a 212, the CPU cores will hit the 100 °C "throttle" point and stay there until the load is reduced.

Over-temperature protection will reduce the CPU clock speed and system performance will be adversely affected.

If you don't believe us, fit the 212 to the 14700F, run a stress test and check CPU temperature + clock speed. You'll have to modify the fixing brackets or use a glue gun.

Good luck if you persist with inadequate cooling.


Sorry, but I don't understand what you mean by "just the socket".

The web site for the 212 does not mention support for motherboards fitted with an LGA1700 socket. In other words, it won't fit.

The 212 list includes virtually all the other common and obsolete CPU sockets I can think of (apart from limited support for AM5).

As I said earlier, it seem likely the 1700 is not supported by the ancient 212 design, because this socket has a far more pronounced rectangular outline.

I think it cannot handle i already understand maybe i will get aio 360mm hopefully it will do great.its weird they did not give the actual TDP for the cooler

 

[ridwan123]

Liquid is not necessarily needed.

Just not...crappy air, like the 212.

Better i buy the best

 

[CountMike]

Better i buy the best

View: https://www.youtube.com/watch?v=ow0crBSKIXw