Help me with Ryzen 1600X temperature. Too high ?

[saswat12345]

Hi , I recently bought AMD Ryzen 5 1600X , Gigabyte AB350 gaming 3 ATX board , Corsair 3000Mhz 8x2. Have AMD HD6670 DDR3 2GB Gfx card with Corsair VS550 PSU,Corsair Specs 1 cabinet. With 2 case fans. Front & top. With Corsair H60 AIO liquid cooler. Mounted at rear.In Ryzen Master I can see Temperature being idle all time around 51 degree degree lowest temp maybe 48 I've seen but It fluctuates between 50-60 at idle. Max temperature at 100% load is 62 degree it's doesn't exceed 62-63 . I'm running at Base clock 3.6 GHz . Although in Ryzen master shows 3.7 . It automatically adjust the clock & voltage stays at like 1.29 , 1.30+ & fluctuates. My Ram is set at 2933 1.35vt
Is it something to worry about ? Are X model supposed to be high temp ? Or my room temperature ? The temp is fine for Long long years ? Thanks .

 

[nitinvaid20]

doesn't exceed 62-63 is not too high those are perfectly normal tempratures what are the temp of your H60?

 

[Rdslw]

60 is not bad, still not on idle, what thermal paste did you use ? maybe some issues there ?
you should be fine 60 is still safe, if idle is also ~60 then topic is closed.
just watch it and replace paste to something like mx4 if temps will go up.

 

[saswat12345]

nitinvaid well I don't know about the H60 cooler Temperature ? Any way to check ?

 

[saswat12345]

Rdslw well Idle temperature is 51 degree as I said . It fluctuates between 51-60 but yeah idle is 51-53 if it goes to 60 then it comes down like 59 then 58 then 57 & comes back to 51 & I didn't change the stock paste it came with H60 . It's there over it .

 

[saswat12345]

I just noticed the Peak speed went up to 4 GHz automatically & came back to 3.7 . I didn't know Ryzen does auto over clock . But yeah 52 degree idle at 3.7

 

[Rdslw]

what I found:
"Nah, the H60 comes with Shin-Etsu paste pre-applied. Good stuff."
I think It might be that this paste is just not touching perfectly with your cpu. Still not something to worry about.
https://www.youtube.com/watch?v=r2MEAnZ3swQ
I like using a tube and making a mess. it just feels better

 

[saswat12345]

Well in my Gigabyte bios it shows

CPU - 42 degree . Chipset - 48 , VRM MOSS- 76 degree , System 1- 41 degree , PCIEX 16 - 43 , VSOC MOS - 66 degree . With 1.284 ,1.296 around voltage . But in Ryzen master , HWMonitor & other inside PC applications around 50-60 degree

 

[wifiburger]

Hi , I recently bought AMD Ryzen 5 1600X , Gigabyte AB350 gaming 3 ATX board , Corsair 3000Mhz 8x2. Have AMD HD6670 DDR3 2GB Gfx card with Corsair VS550 PSU,Corsair Specs 1 cabinet. With 2 case fans. Front & top. With Corsair H60 AIO liquid cooler. Mounted at rear.In Ryzen Master I can see Temperature being idle all time around 51 degree degree lowest temp maybe 48 I've seen but It fluctuates between 50-60 at idle. Max temperature at 100% load is 62 degree it's doesn't exceed 62-63 . I'm running at Base clock 3.6 GHz . Although in Ryzen master shows 3.7 . It automatically adjust the clock & voltage stays at like 1.29 , 1.30+ & fluctuates. My Ram is set at 2933 1.35vt
Is it something to worry about ? Are X model supposed to be high temp ? Or my room temperature ? The temp is fine for Long long years ? Thanks .

Those temps reported on the Ryzen Tool are real time Package Node, you need to uncheck monitoring on the Ryzen Tool since that adds a CPU load and temps go up !

install CPUID HWMonitor, you can see your CPU temps vs Package Node temps

my Ryzen 1600x 4.1ghz @ 1.42v idles at 33c / 45c(Package Node) with air cooler