Question HELP MYPCS ACTING STUPID

[waffleman4657]

i recently built my PC and i got a GTX 2070 as the GPU and it worked for the first 28 or so hours i played on my PC but then it wouldn't work and the monitor said there is no hdmi detected so i switched my monitors but the same thing happened and every time i turn on my PC the GPU fans start spinning so fast it gets so loud and the GPU fans don't slow down i'm not sure what to do any recommendations?

 

[DSzymborski]

Let's start with all the specs, including exact power supply.

 

[waffleman4657]

my specs are 16gb ram, 850w gold plus psu, Ryzen 2700x cpu, msi gaming motherboard plus, rtx 2070, cooler master ml240l aio, 1tb hdd and 120 kingston ssd

 

[iMatty]

Well after reading same problem on geforce forums, the person managed to fix it by checking on his power cables, he had a power cable not correctly plugged so his GPU fan's kept going up to 100% then going back to normal after a few minutes.

 

[Saga Lout]

You've got a lot of theads here this morning, Matty. If they're all about the same problem, some may be removed.

 

[waffleman4657]

my problem is that every time i turn on PC the GPU fans get up to 100% and there is no input detected from the HDMI as well as the display-ports aren't being picked up on my monitor and i cant even do anything and i'm not sure what to do?

 

[Dreamevil55]

my problem is that every time i turn on PC the GPU fans get up to 100% and there is no input detected from the HDMI as well as the display-ports aren't being picked up on my monitor and i cant even do anything and i'm not sure what to do?

It's a power or a thermal issue most probably. Try and check the card on a different system maybe ? Say on a friend's PC and check if it works ?

 

[iMatty]

It's a power or a thermal issue most probably. Try and check the card on a different system maybe ? Say on a friend's PC and check if it works ?

I remember seeing other member having the same issue, he fixed it by double checking on the power supply cables going to the GPU.
And also if you are using the same wire as a split like 8 pin + 4 pin don't use the same wire.
Use two different wires that should help fix the issue.