Hi everyone
I'm having problems with my first build ever: when I try to switch it on I can hear the AIO pump, fans and PSU fan spin but they immediately turn off after less than a second (like a short circuit).
components:
mobo ASUS ROG STRIX B450-F
processor Ryzen 5 3600
RAM Kingston HyperX predator 2x8GB 3000
AIO Corsair H55
Graphic RTX 2070 super
SSD Samsung 970EVOplus 500GB
PSU Corsair CX750M
every single component is brand new, except for the PSU that I bought from Amazon warehouse.
tests I already ran:
I have checked the cables different times. I have reseated every component different times in every slot available. even if the standoffs have have been mounted I have placed the mobo on its box. I have reset the CMOS both with a jumper on the pins and by takyng off the battery.
I'm starting to think that this may be a PSU issue, but I can tell for sure the mobo is powered on because of a RGB LED on the IO shield. I don't have any other component to test.
I'm having problems with my first build ever: when I try to switch it on I can hear the AIO pump, fans and PSU fan spin but they immediately turn off after less than a second (like a short circuit).
components:
mobo ASUS ROG STRIX B450-F
processor Ryzen 5 3600
RAM Kingston HyperX predator 2x8GB 3000
AIO Corsair H55
Graphic RTX 2070 super
SSD Samsung 970EVOplus 500GB
PSU Corsair CX750M
every single component is brand new, except for the PSU that I bought from Amazon warehouse.
tests I already ran:
I have checked the cables different times. I have reseated every component different times in every slot available. even if the standoffs have have been mounted I have placed the mobo on its box. I have reset the CMOS both with a jumper on the pins and by takyng off the battery.
I'm starting to think that this may be a PSU issue, but I can tell for sure the mobo is powered on because of a RGB LED on the IO shield. I don't have any other component to test.