Question **HELP** - Troubleshoot newly installed PCIe GIGABIT Network Card (Doesn't have a valid IP Config)

[JDCONN2714]

I recently installed a PCIe Network card. I have tried everything I could get my hands on or find via the WWW. The WIN NETWORK TROUBLESHOOTER continues to come up with "ETHERNET 2 Doesn't have a valid IP configuration". Just to be clear I need the "ETHERNET 2" to work. ETHERNET 2 goes wired (brand new cable) from my PCI card to my Router/Cable Modem ( NETGEAR AC1750 WiFi Cable Modem/Router {MODEL= C6300}).

Things I have tried (in no certain order)
>Using a Command Prompt as Administrator:
>netsh Winsock & Reset netsh int IP reset (restarted PC)
>IPconfig /release, then__IPconfig /flushDNS, then__IPconfig /renew (restart PC)

> I have updated and reinstalled my Network Adapter Driver many different ways.

> I have done several factory resets on my Router.

> I have power cycled the router and PC multiple different ways.

Here are the most current screenshots of what I am seeing regarding ETHERNET 2

 

[white.a.drew]

I recently installed a PCIe Network card. I have tried everything I could get my hands on or find via the WWW. The WIN NETWORK TROUBLESHOOTER continues to come up with "ETHERNET 2 Doesn't have a valid IP configuration". Just to be clear I need the "ETHERNET 2" to work. ETHERNET 2 goes wired (brand new cable) from my PCI card to my Router/Cable Modem ( NETGEAR AC1750 WiFi Cable Modem/Router {MODEL= C6300}).

Things I have tried (in no certain order)
>Using a Command Prompt as Administrator:
>netsh Winsock & Reset netsh int IP reset (restarted PC)
>IPconfig /release, then__IPconfig /flushDNS, then__IPconfig /renew (restart PC)

> I have updated and reinstalled my Network Adapter Driver many different ways.

> I have done several factory resets on my Router.

> I have power cycled the router and PC multiple different ways.

Here are the most current screenshots of what I am seeing regarding ETHERNET 2

What are the full systems speccs it may not be compatible with your system

 

[JDCONN2714]

 

[white.a.drew]

It should work in your system you just need to update the bios you seem to be and the first bios launch for the mobo... dosnt seem like it's ever been updated

 

[JDCONN2714]

Thank you for taking a look. I went to Dell to update the BIOS and the version installed is the most current available. Any other thoughts?

 

[white.a.drew]

Thank you for taking a look. I went to Dell to update the BIOS and the version installed is the most current available. Any other thoughts?

At this point then the issue lays in the decyfer algorithm the with chip most likely you will need to replace the card request a new one be sent the may have you send this one back though