Help with my PC ?

[josh22]

So I was messing around with it and I put in a Graphics card to see if it would fit and then I took it out. I already have integrated graphics with my cpu. Then when i turn my pc on it says on the monitor "No Signal" anyone know why?

specs -

cpu - AMD A8 6600k
gpu - Radeon 8570D
8Gb of ram

 

[emdea22]

Do a bios reset but keep in mind:
When posting problems always include full system specifications.

 

[slyu9213]

The motherboard might be trying to output video out of the video card that was removed. Not sure if it does that really. A Bios/CMOS reset should set everything back to default settings. That should fix just about everything unless something fatal happened to the motherboard or CPU.

 

[TechsavvyAMD]

After removing graphic card have you connected the VGA pin to your motherboard,if no display device is connected...then there is a NO Signal............

 

[josh22]

After removing graphic card have you connected the VGA pin to your motherboard,if no display device is connected...then there is a NO Signal............

Yes the VGA cord is connected to the mobo

 

[TechsavvyAMD]

After removing graphic card have you connected the VGA pin to your motherboard,if no display device is connected...then there is a NO Signal............

Yes the VGA cord is connected to the mobo

Okay!!!!!! replace the CMOS battery on the motherboard...and restart your PC...it will work.........!!!!!!!!!!!!!!!

 

[slyu9213]

Did you reset the BIOS through the BIOS reset jumper or reset the CMOS by removing the CMOS battery for a minute or so and placing it back. After doing that try booting up the PC again with the vga plugged into the mobo VGA port. Do you have a small motherboard speaker installed that gives beep codes? If RAM isn't working correctly I guess video may not output as the IGP wouldn't have any RAM to use as VRAM.