Hey if i load the optimized defaults will this reset the bios and all settings?

[roudy-s]

Hey yesterday i was looking in my bios and see something that is d.o.c.p i enabled profile 1 and then i have disabled it and entered the ai tweaker i just want to reset everything to its default if i use the load optimized default will it reset everything to its default and any change or overclock will be reset? And another thing i have used ryzen master on my desktop and i have done some overclock and restart my pc and saved the profile then i have discarded all the changes and reset the program from the reset botton on the program and restart my pc then i have uninstalled the program will this revert everything to normal and than i have installed the program and didnt run it in order to keep everything as default. And i have asus prime a320m-a and a ryzen 5 1600x

 

[Peter Martin]

Yes it will reset all the settings to the optimal default values just as the name implies

 

[bgunner]

MERGED QUESTION
Question from roudy-s : "How to reset all overclocking settings of a cpu to normal?"

Hello, if i would like to reset everything that i have done to normal i mean the cpu changing frequency and voltage and ram i have used the bios to check if i can overclock i couldnt because i have an asus prime a320m-a.
i have tried only to put the ram in d.o.c.p profile 1 settings and in the pc i have used ryzen master to try to overclock by puting the voltage at 1.35v and speed at 4ghz and when done of doing this it ask for reboot, after reboot the speed of the cpu and voltage didnt change i dint know why , maybe because my board is not for overclocking or doing these stuff, i have used it on profile 1 to change these settings, but after seeing that nothing has changed i was trying to switch everything back but how to do it the correct way,
i want everything to go back to normal i dont want to damage my components and thank you. I dont know anything about overclock nor abour ryzen master i have tried my best watching some videos but from what i have saw and read in the end, the ryzen master is a bad software that you cant revert to normal speed so this is what made me consider asking you and about this problem and my cpu is a ryzen 5 1600x thank you i need a very clear answer guys thanks in advence.
Ps: the cpu show a speed of 3.6ghz as a top speed but i know it can reach 4ghz with turbo so why it dont show this and in the ryzen master current tab it shows the speed of cpu is 3.7ghz how is that?
I have a 2666mhz ram 8gb x2 so 16gb of ddr4 ram hyperx furry 2666mhz i have only changed here the d.o.c.p profile from disabled to profile 1 and than i have load optimized defaults witch make the d.o.c.p disabled again and all set to auto in ai tweaker.

Sorry for the big paragraph but need to give you all the information in order to help me.

To reset the BIOS back to factory settings you need to "load default profile" or "optimized default profile". this will properly set the Bios to the point that it was first turned on once built.

when overclocking did you select save and restart after adjusting the parameters? Short cut is F10.

 

[roudy-s]

Hey i did save the settings in bios when i did the d.o.c.p enabled on profile 1 because i cant dp anything on my mobo but in ryzen i have saved the profile 1 settings and restart but i see that the speed of cpu was 3.6ghz but in profile 1 the speed was set to 4ghz and the current speed was 3.7ghz how is that and after all of this i discard the changes in the profile 1 and click on reset this is what i have donr and thank you but what is the point of if i jave saved my parameters?

 

[bgunner]

You are trying to overclock on a motherboard that does not support overclocking. Most times not even software overclocking tools will work with a board that does not support overclocking so in short you can not overclock the CPU in that system without changing to a B- series chipset/motherboard.

 

[roudy-s]

So am i good and nothing will happen to my cpu frequency and voltage and ram frequency and voltage neither from the bios nor the ryzen master? So you mean that even if i use the ryzen master it will not make any change to the cpu because of mh motherboard thank you realy i appreciate your help.

 

[bgunner]

If your bios has an adjustment for voltage for specific pieces then the voltage can be changed with overclocking software so watch the voltage to be sure. As for the CPU frequency that will not change using a program. It is a limitation of the A-320 chipset, overclocking is not supported.

 

[roudy-s]

If your bios has an adjustment for voltage for specific pieces then the voltage can be changed with overclocking software so watch the voltage to be sure. As for the CPU frequency that will not change using a program. It is a limitation of the A-320 chipset, overclocking is not supported.

ok i understand what u have said but i don't know if the voltage have changed or not but if they are if i use the load default optimized in bios and save and exit will this reset any change that has been made? and i reset the ryzen master and restart after that i reset the bios using load default optimized and after that update bios and load default optimized? will all of this reset the bios and settings and voltage and ram to its stock speed and revert everything back to normal? thank you

 

[bgunner]

yes setting the bios to default will set the voltage back to stock settings.