how many fps will a r9 280x and fx 6300 get in bf4

[mcle]

hi, i am wondering how many fps should a gigabyte windforce oc, fx 6300 and 8gb of ram get in bf4 on default ultra settings. i would like to know the extreme minimum and the average fps count, thanks.

 

[TheMagicalWallaby]

You would be getting an FPS within the 50's and an occasional dip into the 40's. I would expect high 40's to low 50's. I do not believe the FPS would ever dip into the 30's.

 

[GRUxTSAR]

At max settings? You'll average around 50 during normal gameplay. You might get drops into the 40s when things get intense. I doubt you'll ever drop lower than the low 30s. The FX 6300 is the recommended AMD CPU for max settings so you should be fine

 

[cropheus]

I had a almost constant 60fps(mby few unnoticable drops) with MSI GTX 760 in 64-player multiplayer. You shouldn't see dips below 50 ever. But the only difference is, I have a i7-4770.

 

[mcle]

i made this post because this is my build and it is dropping into the 20s and usually staying around the high 30s to 40s

 

[cropheus]

what resolution? it doesn't make any sense

 

[mcle]

i am playing at 1920x1080p now on default high, i am getting a constant 30 to high 40s fps. i got this performance boost after changing my page file

 

[TheMagicalWallaby]

If you could list your specs that would be great.

 

[Vic 40]

@mcie,

Do you really need to start two threads for this?
http://www.tomshardware.co.uk/answers/id-2437246/fps-problems-bf4-6300-280x.html

 

[mcle]

@mcie,

Do you really need to start two threads for this?
http://www.tomshardware.co.uk/answers/id-2437246/fps-problems-bf4-6300-280x.html

sorry i was just trying to get as many answers as possible.

themagicwallaby
r9 280x gigabyte windforce oc 3gb
fx 6300
8gb ram
asrock 970 pro3 2.0

 

[TheMagicalWallaby]

Run intel burn test or the newest version of prime 95 and watch for a failure. Also watch for your CPU clock speed and check to see if it goes down.

 

[mcle]

https://www.dropbox.com/s/k7t4jpmhjp6wre5/log%201.CSV?dl=0 intel test burn
https://www.dropbox.com/s/oe4zo2n8yvqv8wf/log%202.CSV?dl=0 far cry 4
https://www.dropbox.com/s/etpnzs8zwvkav0m/log%203.CSV?dl=0 intel test burn on max settings

i have been told that there are no problems

 

[Vic 40]

@TheMagicalWallaby,

you can look at these with either excel or libre office calc.

 

[TheMagicalWallaby]

https://www.dropbox.com/s/k7t4jpmhjp6wre5/log%201.CSV?dl=0 intel test burn
https://www.dropbox.com/s/oe4zo2n8yvqv8wf/log%202.CSV?dl=0 far cry 4
https://www.dropbox.com/s/etpnzs8zwvkav0m/log%203.CSV?dl=0 intel test burn on max settings

i have been told that there are no problems

If no failures popped up, then you should be good to go on that end. Try prime 95 this time and see if a worker stops.