News How to 3D Print Without Supports

[Admin]

Removing supports is always challenging, especially if they are located in difficult-to-reach or delicate parts of the print. Get to know the tips to consider to avoid them.

How to 3D Print Without Supports : Read more

 

[Geef]

How to 3D Print Without Supports​

All within a few seconds I glanced at the post name and thought it read How to 3D Print Without Sports. Then I imagined what I would do after starting a 3D printer up since it takes so long. Sports is a good idea. Watch some football or something. 😆 👍

 

[Tutor2]

Removing supports is always challenging, especially if they are located in difficult-to-reach or delicate parts of the print. Get to know the tips to consider to avoid them.

How to 3D Print Without Supports : Read more

Haha, that's funny

 

[Conor Stewart]

if the bridge is more than 5mm, you must use supports.

This is just false. Bridges can easily be much longer than 5 mm without much sagging. On a half decent printer even over 60 mm bridges can manage fine.

 

[Cynthia22]

This is just false. Bridges can easily be much longer than 5 mm without much sagging. On a half decent printer even over 60 mm bridges can manage fine.

I agree with you. Though I think instead of risking and printing a long bridge without them you can use it just to be safe especially when there are holes