How to change fan speed? Corsair LL120's

[ironcreeper2004]

So, I installed my Corsair LL120's today and they work fine. However, they're really noisy and Ithink it's because they are stuck on max fan speed. I've installed Corsair LINK to see if I can change the fan speed but I don't know how. Any suggestions?

 

[ironcreeper2004]

Thank you so much for the help! One more question, the way I had them plugged in before, would it of damaged anything? I'm new to PC builds so I just want to make sure. I will try what you've told me when I get home which will be in a couple hours, I'll tell you if it goes alright, for now, I'll keep the post as unsolved.

 

[COLGeek]

The fans should be okay. Just let us know how it goes when you get everything connected properly. Good luck.

 

[ironcreeper2004]

The only thing that could be damaged with the way I had the fans connected before is the fans themself right? And even the fans themself are unlikely of being damaged? Nothing like the mobo, cpu cooler, etc (any of the components) could be damaged right? I just worry a lot haha. I'll let you know how it goes for sure, Thanks again

 

[ironcreeper2004]

I have a problem, one, the EXT_FAN is a 5 pin so surely I can't use it for my fans and 2 I have the CHA_FAN1 and CHA_FAN2 used up by each of my fans for my radiator

 

[COLGeek]

The fans for the radiator should be connected to the headers attached to your CPU cooler. Which of your 4-pin motherboard power headers are you not using?

 

[ironcreeper2004]

I'm going to check it all and I'll answer back in the morning, I'm really tired, going to bed.

 

[ironcreeper2004]

My cooler is an NZXT Kraken X62, I have each of the fans for the radiator attached to CHA_FAN1 and CHA_FAN2 and they work fine, they're spinning. Am I supposed to have the cables which come off of the CPU cooler (the cables I used to have the case fans connected to) attach to the fans for the radiator?

 

[COLGeek]

My cooler is an NZXT Kraken X62, I have each of the fans for the radiator attached to CHA_FAN1 and CHA_FAN2 and they work fine, they're spinning. Am I supposed to have the cables which come off of the CPU cooler (the cables I used to have the case fans connected to) attach to the fans for the radiator?

Yes, the radiator fans should connect to the headers attached to the cooler. The case fans should connect to the motherboard connections.

 

[ironcreeper2004]

My cooler is an NZXT Kraken X62, I have each of the fans for the radiator attached to CHA_FAN1 and CHA_FAN2 and they work fine, they're spinning. Am I supposed to have the cables which come off of the CPU cooler (the cables I used to have the case fans connected to) attach to the fans for the radiator?

Yes, the radiator fans should connect to the headers attached to the cooler. The case fans should connect to the motherboard connections.

Thanks so much for continuing answering on this post, all done now. 😀