HOW TO DISCOVER CLIENTS ON MY NETWORK(using netcut/advanced ip scanner)

[rajaboinapavan]

I am connected to wireless network through access point device which is connected to laptop via lan cable.when i try to ip scan i get only my laptop ip.my access point device has two modes 1.gateway / WISP 2.wireless bridge / repeater.(network details-my accesspoint device ip is 192.168.1.1 and my isp ip connects via dhcp server with Public IP address redacted)
is there any way to discover clients ip on my network.

 

[boosted1g]

I use this: https://www.softperfect.com/products/networkscanner/

 

[getochkn]

How are the other devices connected? To the same access point? I don't quite understand your setup. What is your internet, cable, 4g, DSL ?

 

[boosted1g]

What other devices IP are you trying to find?

Just to be clear there is a wifi router (somewhere) -(wifi)->Laptop -(Ethernet)->Access Point -(wifi)-> Devices?
If so, while windows has the ability to do this, it does not do it well. For performance I would ditch the laptop and either use Ethernet from router to access point, if that is not possible then use powerline adapter to get data from router to access point, and if wifi is the ONLY option to get to router then use something like a ubiquiti nanostation which has higher power radio and has embedded hardware designed for the task.

 

[bill001g]

The router will have a list it depends if it will let you see the arp table or not.

The large problem for wireless is it is now common to have a option set called wireless isolation which prevents wireless devices from seeing each other.